Q.V.P. ES10 with Pneumatic Vacuum Foot Switch - Manual

ES10 Industrial SET-UP DIAGRAM
For VAKuum KLAMPING
The Electric Pump is always running when doing
VAKuum Klamping; therefore, put the switch on the
Electric Controller to “VAK Klamp.” NEVER do VAKuum
Klamping with the switch on “VAK Bag.”
When you are not using the pump for Klamping keep the
foot pedal off or remove the Klamping set-up.
Pressing on its top side creates vacuum to the
VAK Klamp(s) and the VAK Bag(s). Pressing the pedal
on its bottom side shuts off the vacuum from the pedal to
the klamp and allows air to bleed back to the klamp and
release the piece.
the pedal
VAKuum
Jig
10/06/03 - .CDR (REV.2) ES5 SuperPro Klamping
Quality VAKuum Products, Inc.
Or visit our site at
www.qualityvak.com
74 Apsley St. - Hudson, MA 01749
Tel: 978-562-4680 - Fax: 978-562-4681
CALL 1-800-547-5484 TODAY!
½ Tubing
Pneumatic
Pedal
3/8 I.D.
Hose Adapter
3/8 I.D.
Filter
Electric Pump
Electric
Controller
W
Remove orange plastic plug and screw in filter assembly.