Q.V.P. EP10 - Continuous Flow Veneering - Manual

Quality VAKuum Products, Inc.
Or visit our site at
www.qualityvak.com CALL 1-800-547-5484 TODAY!
EP10 INDUSTRIAL MANUAL SET-UP DIAGRAM
(continuos flow) MANUAL VAKUUM BAG OR FRAME PRESS VENEERING
4/7/98 - EP10 Manual VB&FP Veneering.cdr
Filter
Electric Pump
Foot Pedal
(Optional)
1/2“ I.D.
Tubing
Electric
Outlet
VAKuum Bag
or
Frame Press
VCA6
Gauge
1.) Screw the filter/gauge assembly onto the Electric Pump.
CAUTION:
Do not use the filter as leverage to tighten the
assembly, as it may break. Use a wrench on the brass fittings to
tighten the assembly.
2.)
3.) Attach the long clear piece of tubing from the filter/gauge assembly to
the VCA6 (VAKuum Connector Assembly) on the VAKuum Bag or
VAKuum Frame Press. Refer to Instructions for Assembling the
VAKuum Bag for details.
4.) If you are using an optional Foot Pedal connect the pump to the pedal
and the pedal to the electric outlet. The pedal is an On/Off switch for
the pump.
Attach the long piece of hose to the barb on the filter/gauge assembly.
S
Remove orange plastic plug and screw in filter assembly.
74 Apsley St. - Hudson, MA 01749
Tel: 978-562-4680 - Fax: 978-562-4681