PA Industries Precision AirFeed - Manual (Page 5)

3
SIMPLE INSTALLATION
Our feeds are extremely easy to mount.
Two (or four) mounting bolts and a single
air line connection are all that’s necessary.
A compact, clean design permits the P/A
Air Feed to be mounted right on the die set.
QUICK SET-UP
Adjustments are quick, simple and positive.
To change feed length, turn the adjustment
screw to the desired pitch between positive
stops and tighten the locknut.
PATENTED DESIGN
Technologically the BEST air feed on the
market today! U.S. Patent No. 4,444,346.
REPEATABILITY
Consistently holds ±.001" (.025mm) stroke
after stroke. The most precise press feed
available at a reasonable cost.
HANDLES VARIETY OF MATERIALS
Paper, plastic, foil, fabric, wire, tubing
. . . you name it and P/A will feed it. Highly
polished materials or extrusions, preformed
or irregularly shaped materials – all can
easily be adapted with special clamps.
AIR FEED FEATURES
Nylock hex nut used in aircraft engines
to absorb vibration and eliminate loosening
Shock absorber stops
slamming and reduces noise
Large adjusting screw and lock nut
provide vernier feed length control
Combination stock dampener and
adjustable guide rollers provide
vibration free material to the feed
Counterbored holes and
precision ground shoulder
screws provide coarse feed
length adjustment and secure
rigid alignment
High strength, chrome plated, steel
guide rails maintain feed head alignment
throughout its stroke