PA Industries Precision AirFeed - Manual (Page 17)

15
FEEDING SHAPED MATERIAL PROTECTIVE COVERS
By machining the grip side of the Clamps to the
desired contour, any kind of material or preformed
parts like electronic contacts, terminals, or wire,
tubing, and channel can be easily handled. P/A Industries strongly recommends our rugged,
see-through Cover of Plexiglas or Expanded Metal
for operator protection. Pre-drilled holes in the Feed
Guide Rail accept the Slip-Fit Fasteners that secure
the Cover over the top and sides of the Feed. These
Protective Covers further protect the Feed from dirt,
oil, chips, and other harmful materials.
SPECIAL CLAMPS
STANDARD CLAMPS
MODIFIED STANDARD CLAMPS
PLEXIGLAS
COVER
(Available for AX, CX,
DX, and FX Models)
EXPANDED
METAL COVER
(Available for HX
and LX Models)