PA Industries Precision AirFeed User Manual
Page 13
11
CONTROLLING THE FEED
FEED LENGTH ADJUSTMENT
REPEATER CONTROL SYSTEM
The Air Feed can be multiple stroked for each cycle
of the Press to obtain greater feed length increments
than the Air Feed’s maximum feed stroke capacity.
The Repeater Control has a digital counter and Key
Lock Selector Control for “Feed Control Press” or
“Press Control Feed”. Used with Remote Electric
Actuation and 120 VAC, 50/60 Hz Power Supply.
Transformers for other voltages are available.
For coarse feed length adjustment there are
counter-bored holes provided in the side rails of the
Feed. Move the Stop Block, and insert and tighten
the Shoulder Screws in the holes closest to the
desired feed stroke.
For fine
adjustment,
move the Feed
Slide to the
exact distance
between it and
the Main Body.
Adjust the
Stop Screw to
contact the
Feed Slide and
tighten the Hex
Nut.
➥