PA Industries Precision AirFeed - Manual (Page 27)

We warrant our new parts against defects under normal use and service for a period of 2 years after
date of shipment. Our obligation under this warranty is limited to replacing or repairing (at our option) the
defective part without charge, F.O.B. our plant in Bloomfield, Connecticut. The defective part must be
forwarded to our plant, freight-prepaid, for our inspection prior to replacement or repair. EXCEPT AS
EXPRESSLY PROVIDED HEREIN, THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING A WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
WARRANTY
WARNING !
This equipment offers various means of operating metal forming machines, delivers material or parts to
the machine, or removes material, parts, or scrap from the machine. The operator’s hands must NOT be
in or near the point-of-operation of the machine, or the operating parts of any equipment installed on the
machine, or bodily injury could result. The EMPLOYER must post adequate warning signs on the press
with proper warnings for his machine and the specific application to which the machine and equipment
are being applied. If the EMPLOYER requires help in preparing wording for his application after he has
determined the details of that application, he is invited to contact P/A Industries for such help.
The EMPLOYER must meet all OSHA regulations including, but not limited to, 1910.211, 1910.212,
1910.217 and all applicable state laws. All equipment manufactured by P/A Industries is designed to
meet the construction standards of OSHA in effect at the time of sale, but the EMPLOYER installs the
equipment, and therefore the EMPLOYER is responsible for installation, use, application, training, and
maintenance, as well as adequate signs on the press or other machine onto which this equipment will be
installed.
All P/A products are sold for use only in accordance with our installation and operating instructions
which accompany the products. P/A accepts no responsibility for any use or application not in accor-
dance with our instructions, or for any modification or alteration of the product.
Accident-free press operation will result from a well developed, management-sponsored and enforced
press safety program. P/A Industries is not responsible for notifying the user of this equipment of further
changes in State or Federal laws, construction standards, or changes in P/A designed and built products.