MoTeC M84 - Manual (Page 69)

MoTeC ECU Manager Software 67
Keyboard Reference
PgUp Adjust Up
PgDn Adjust Down
Ctrl+PgUp Fast Adjust Up
Ctrl+PgDn Fast Adjust Down
Shift+PgUp Slow Adjust Up (Not available on all tables)
Shift+PgDn Slow Adjust Down (Not available on all tables)
Enter Set the adjusted Value
Alt+X Close the ECU or File
Esc Show the Adjust menu with the current screen item highlight
Tab Select the next Layout page
Spacebar Jump the cursor to the site closest to the current engine
operating point
F1 Show Help
F3 Show the Diagnostics Errors screen
F5 Toggle between the Fuel and Ignition screens
Alt+F6 Remember the current screen, show it when F6 is pressed
Alt+F7 Remember the current screen, show it when F7 is pressed
Alt+F8 Remember the current screen, show it when F8 is pressed
F6 Select the Fuel Timing screen (or the remembered screen)
F7 Select the Boost Limit screen (or the remembered screen)
F8 Select the Lambda Table screen (or the remembered
screen)
F9 Show the Tools menu
F10 Select the Main menu
F11 Copy site up and right
C Turn Compare Mode Off / On
E Edit the File Comments
G Switch table between table mode and graph mode
L Lambda Was
Q Quick Lambda
W Quick Lambda plus copy up and right
V Show the last View screen
S Show the sensors tab on view screen
Y Reverse the Y axis on the table, graph or both
Delete Delete * at the current site
Backspace Place * at the current site
Home Select one of a number of default view angles for the graph
Ctrl+Arrrow Change the view angle of the graph
Shift+Arrow Mark a block on the table (mathematics may be applied to
the block)
Ctrl+Shift+Arrow Copy the current table value to an adjacent cell