MoTeC M84 - Manual (Page 51)

MoTeC ECU Manager Software 49
ECU Manager Software
Introduction
The following is an overview of the main concepts of the ECU Manager
software. More detailed information is available from the online help.
The ECU Manager software is used for :
• Calibration and Setup
• Sending calibration files to the ECU
• Viewing Sensor readings
• Viewing
Diagnostics information
• Testing
the Outputs
• Unloading the logged data
• Upgrading the ECU firmware
• Enabling ECU options.
PC Requirements
See the MoTeC Software section.
Connecting a PC to the ECU
See the MoTeC Software section.
Installing the Software
See the MoTeC Software section.
Basics
Starting ECU Manager
To start ECU Manager double click the icon on the desktop or select ECU
Manager from the Start menu, for example: Start / Programs / MoTeC / M84/
ECU Manager 1.0
Note that the desktop icon will start the latest version of ECU Manager.