Dialight SafeSite High Bay ATEX/IECEx - Manual (Page 4)

Dialight - LED Solutions for Industrial and Hazardous Applications
Tel: +44 (0) 1638 665161 – Fax +44 (0) 1638 660718 – www.dialight.com
Inspection
Within the scope of maintenance or inspection routine the
following should be included.
Protective hoses covering the connection cables.
Cable entries must be free of corrosion.
Perform visual mechanical and electrical inspections on a
regular basis. We recommend routine checks to be made
on a yearly basis. Frequency of use and environment
should determine this. It is recommended to follow an
Electrical Preventive maintenance Program as described in
NFPA 70B: Recommended Practice for Electrical
Equipment.
The Lens should be cleaned periodically as needed to
ensure continued photometric performance. Clean the Lens
with a damp, non-abrasive, lint free cloth. If not sufficient,
use mild soap or a liquid cleaner.
Inspect cooling fins on the luminaire to ensure that they are
free of any obstructions or contamination (i.e. excessive
dust build up). Clean with non – abrasive cloth if needed
Repairs / Overhaul / Modification
The relevant national regulations which apply to the
maintenance / servicing of electrical apparatus in
explosive atmospheres shall be observed.
Should the Luminaire enclosure be damaged, only a
replacement will be permitted. In case of doubt, the
equipment should be returned to Dialight Corportation
for inspection/repair.
Modifications to the device or changes of it’s design
are not permitted.
The equipment must be operated according to the intended
purpose in a perfect and undamaged condition.
Disposal Recycling
When the apparatus is disposed of, the respective national
regulations on waste disposal should be observed.