Camco Vortex 8 User Manual - Manual (Page 25)

VORTEX
S I LV E R SE R I ES
USER MANUAL
VORTEX SILVER SERIES V8
P.24
Output Power
1 kHz, THD ≤ 1%, in dual channel operation
typical values @ 230 V / 50 Hz
duration limited by fuse / thermal protection for RL<=8 Ω
1250 W @ 16 Ω
2300 W @ 8 Ω
4000 W @ 4 Ω
5100 W @ 2 Ω
Peak Output Power
1 kHz, single sine wave in dual channel operation
typical values, may be subjected to component tolerances
1250 W @ 16 Ω Peak
2500 W @ 8 Ω Peak
4900 W @ 4 Ω Peak
5300 W @ 2 Ω Peak
Mono Bridge and Parallel Mono Operation Output Power
1 kHz, THD ≤ 1%, in mono bridge operation
typical values @ 230 V / 50 Hz
duration limited by fuse / thermal protection for RL<=16 Ω
1 kHz, single sine wave in mono bridge operation
typical values, may be subjected to component tolerances
Mono Bridge
4600 W @ 16 Ω
8000 W @ 8 Ω
10200 W @ 4 Ω
5000 W @ 16 Ω Peak *
9800 W @ 8 Ω Peak *
10600 W @ 4 Ω Peak *
Parallel Mono
4600 W @ 4 Ω
8000 W @ 2 Ω
10200 W @ 1 Ω
5000 W @ 4 Ω Peak *
9800 W @ 2 Ω Peak *
10600 W @ 1 Ω Peak *
Circuitry Hybrid Class H
Signal to Noise-Ratio
22 Hz – 20 kHz, 4 Ω load
>107 dB (unweighted)
>110 dB (A-weighted)
Power consumption @ 230 V
* both channels driven at 550 W output power (approx. of max. THD limited output power
with pink noise to represent typical music signal)
Amplifier standby (power off): 8 W
Idle (Amp powered on): 60 W
4 Ω: 1900 W
*
2 Ω: 2100 W *
Maximum output voltage
in dual channel operation; typical values, may be subjected to component tolerances
± 200 V peak
Maximum output current
in dual channel operation; typical values, may be subjected to component tolerances
± 72 A peak
5 SPECIFICA
TION