Camco Vortex 8 User Manual - Manual (Page 18)

VORTEX
S I LV E R SE R I ES
USER MANUAL
VORTEX SILVER SERIES V8
P.17
4.1.3 Hot Key Functions
The Hot key Functions give you a quick access to your favorite screens
and some special features:
Power Off Hot Key (accessible from all menus and screens):
Touch and hold MENU and ENTER simultaneously (≈3 s). The Power Off
screen will be displayed. Holding longer (or touching and holding again
MENU and ENTER) will display the power off confirmation window.
Level Attenuator Hot Key (accessible from all monitor screens):
Touching the HSB (left / right) opens the Level Attenuator Screen for a
quick access to level adjustments. After adjustment you can step back to
the previous screen by touching the MENU button.
Scroll Monitor Menus Hot Key (accessible from all monitor screens):
Touching the VSB (up / down) jumps to the next Monitor screen in a cyclic
way.
Mute Hot Key (accessible from all menus and screens):
Touching button A or button B let you directly jump to the Signal Monitor.
Here you can mute / unmute each channel directly by touching button A or
button B again. After adjustment you can step back to the previous screen
by touching the MENU button.
Home Menu Hot Key (accessible from all menus and screens):
Touch and hold MENU (≈2 s) let you directly jump to the Home Menu.
You can step back to the previous screen by touching the MENU button.
The Home Menu can be defined individually in the Display menu section.
Quick Access Menu Hot Key (accessible from all menus and screens):
Touch and hold ENTER (≈2 s) let you directly jump to the Quick Access
Menu. You can step back to the previous screen by touching the MENU
button.
The Quick Access Menu (QA Menu) can be defined individually in the Dis-
play menu section.
4.2 Power On / Off
As soon as the V8 amplifer is connected to the mains it will start up up the
internal operating system. After a few seconds the display will shortly show
the V8 logo followed by the Power On-Screen (if the amplifier has been
previously switched off).
This is the screen used to switch the amplifier On / Off. Please touch MENU
and ENTER simultaneously to switch the amplifier on.
To power off the V8 either navigate to the Power menu or use the Power
Off Hot Key (see chapter Hot Key Functions). Touch and hold MENU and
ENTER simultaneously for a few seconds. This will display the power off
confirmation window.
Now pressing ENTER once will finally switch off the amplifier.
NOTE: Turning the Amplifier off does NOT disconnect the amplifier
from mains.
See also chapter 3.3.
4 OPERA
TION