BatteryMINDer 28252-AA-Series - Manual (Page 16)

Rev. I-100511 Page 1 P/N VDC28252-AA-Series-MNL
BatteryMINDer ® Model 28252-AA-Series
OPERATING INSTRUCTIONS
1. Pre-Charge Check
(a) Check the Battery Electrolyte level (Non-sealed Batteries).
If necessary, remove the vent caps and add distilled water so
levels are halfway between the upper and lower fill lines.
(b) Location – Ensure the Battery is in a well ventilated area.
Keep the Unit as far away from Battery as the cables permit.
Never place the unit directly above the battery being charged as
gasses from the Battery will corrode and damage the unit. Also,
keep the unit away from high corrosion / wet and moist areas.
2. Connecting BatteryMINDer to your Battery
(Temp/Volt Sensor A) is used to detect the battery voltage and
temperature and to avoid undercharging and overcharging.