B&K Precision 310 - Manual - Manual (Page 16)

-14-
SPECIFICATIONS
ELECTRICAL
Measuring Ranges
0-200.0m ohms in steps of 100µ ohm
0-2000m ohms in steps of 1m ohm
0-20.00 ohms in steps of 10m ohm
0-200.0 ohms in steps of 100m ohm
0-2000 ohms in steps of 1 ohm
Accuracy ±0.5% of reading ±2 digits over the
Operating temperature range, -15°C to
+55°C, with the supplied test leads.
Test Current 1mA => 2000 ohms range.
10mA => 200 / 20 ohms ranges.
100mA => 2000m / 200m ohm ranges.
Test Current Accuracy
±0.
3%
Protection Fuses Supply = 1.5A, HBC, 5 x 20mm, DIN
Current = 1A, HBC, 5 x 20mm, DIN
Voltage = 0.5A, HBC, 5 x 20mm, DIN
SAFETY LVD BS EN 61010-1
EMC BS EN 50081-1
BS EN 50082-1
MECHANICAL
Case Height
110mm
Case Width 250mm
Case Depth 190mm
Bump Test IEC68-2-29
Vibration Test IEC1010, clause 8.3
Drop Test IEC1010, clause 8.4
Impact Test IEC1010, Clause 8.2
Weight 1.542kg
Rated environmental conditions
(1).Indoor Use
(2).Pollution Degree 2.
(3).Altitude up to 2000 meter.
(4).Relative humidity 80% max.
(5).Ambient temperature 0°C~40°C.