頁面 4, Key features, Accessories – Avlex ACT-818 Wideband Single-Channel Digital Receiver User Manual
Page 4

!
ACT-828 is an EIA standard 1U dual channel and ACT-818 is a 1/2U single channel
rack-mountable receiver with metal chassis.
!
Full-color VFD (vacuum fluorescent display) for clear viewing all parameters. All
controls are intuitive and easily accessible, allowing for quick and easy system setup
via a single rotary control.
!
Enhanced RF circuitry improves anti-interference characteristics and system
compatibility.
!
64MHz wide bandwidth allows more interference-free channels can be selected.
!
New digital diversity receiving technology eliminates signal dropouts and enhances
receiving range.
!
Digitally-processed RF circuitry and DigitnamicPlus™ technology eliminates
compander noise assuring the wireless sound quality almost as good as cable
transmission.
!
Second generation DSP technology enhances signal stability and reduces the risk of
signal dropouts during interferences.
!
Improved < 2.7 ms latency. Proprietary Audio A/D Converter provides a true
dynamic range of 115 dBA, T.H.D. < 0.03% at 1 kHz.
!
Without the pre-emphasis and de-emphasis circuit used by analog systems, the
sound quality at high frequency remains clear and detailed.
!
SPDIF Digital Audio Interface facilitates a direct connection to digital mixing consoles
and transmits signal without distortion, therefore S/N ratio will not deteriorate in
long distance transmission.
!
Proprietary 256-bit encryption guarantees secure audio transmission, preventing
unauthorized listening.
!
Built-in 10 SmartEQ™ preset and user-defined microphone capsule equalization for
faithful reproduction to suit artists' preferences.
!
Built-in 10 digital anti-feedback SmartEQ™ minimize howling feedback effectively
without sacrificing sound quality.
!
Ideal audio signal transmissions for studio, stage and music instruments, achieving
“CD quality” performance.
!
Energy-saving design improves power efficiency and decreases temperature rise.
!
Optional MIPRO RCS2.Net software allows real-time network remote-controlling and
monitoring of 64 systems.
Key Features
2
3
Wideband Digital Receivers
Wideband Digital Receivers
Rack-mount kit x 1 set
(ACT-818)
Power Cable x 1
Antenna x 2
User Guide x 1
Rack-mount kit x 1 set
(ACT-828)
Phone Cable x 1
Power Supply ×1
(ACT-818)
Accessories
The following accessories are included: