Autel Autolink AL319 - Manual (Page 21)

20
4) From System Setup screen in scan tool, use the SCROLL
button to select Update Mode, and press the ENTER/Exit
button.
5) Select the programs to be updated in your computer. There are
two types of programs: operating system and DTC library.
(Figure 3.11)
6) Click Update in the MaxiLinkII Tool Kit window to begin
updating.
Figure 3.11
7) During the update procedure, the scan tool displays a message
“Update Program. Please wait…”.
8) When the update has finished, the scan tool will display a
message “Program Update has been done!”
9) Restart the scan tool to finish the whole update.
NOTE: When you made a wrong choice and the scan tool is unable
to work properly, you may need to update the programs. To hold
ENTER/Exit button and power on the scan tool, you will enter the
Update Mode forcedly. Then follow the update procedure to refresh
the program.