Autel Autolink AL319 - Manual (Page 14)

13
6) Tool Self-test: Checks if the LCD display, LED lamps and
keyboard are working normally.
7) Update Mode: Accesses the Update Mode.

Settings of the unit will remain until change to the existing
settings is made.
To enter the Setup menu
When the scan tool is powered on, it displays a Main Screen.
(Figure 3.1)
Figure 3.1
From the Main Screen: Use the SCROLL button to select Setup,
and press the ENTER/Exit button. Follow the instructions to make
adjustments and settings as described in the above setup options.
(Figure 3.2)
Figure 3.2
System Setup 1/8
Language
Configure Monitors
Unit of Measure
Key Beep Set
Status Beep Set