Autel Autolink AL319 - Manual (Page 20)

19
C. LED Test
The LED Test function verifies if the I/M Readiness LED indicator
lamps are functioning properly.
1) Use the SCROLL button to select LED Test from the Tool
Self-test menu, and then press the ENTER/Exit button.
2) In the LED Self-test menu, use the SCROLL button to select
one or more LED lamps to check. The LED should turn on or
off according to the selected commands.
Figure 3.10
3) When completed, press the ENTER/Exit button to exit.
Update Mode
This function allows you to update the scan tool software and DTC
library through a computer.

To update your scan tool, you need the following items.
AutoLink

AL319
A PC or laptop with USB ports
A USB cable
1) Download the programs to be updated to your computer.
2) Run the MaxiLinkII Tool Kit in your computer. (Figure 3.11)
3) Connect the scan tool to your computer through the USB cable
provided.
LED Self-test 1/4
RED LED ON
YELLOW LED ON
GREEN LED ON
Previous Menu