Atec Tektronix-1735 - Manual (Page 6)

Return Loss - >26 dB 50 kHz to 30 MHz.
Input to Output Gain Ratio -
Luminance 1:1 +5% at 15 kHz.
Calibrator
Amplitude - 700 mV, +1%.
Horizontal Deflection System
Sweep - Sweep will occur with or without input signal.
Line and Field Sweep Modes, with the Following
Characteristics -
One: Displays one complete line or field.
Two: Displays two lines or fields.
Three: Displays sync trailing edge and video of three
selected inputs.
Four: Displays sync trailing edge and video of four selected
inputs (mode accessed through remote connector).
Line magnification equals approximately x25 in one and
three line modes x10 in two line mode.
Field magnification equals approximately x20.
Time/div appears on-screen if readout is turned on (in line
mode, not field mode).
Timing Accuracy - 1 µs/div within 2%, 0.2 µs/div within
3%.
Linearity - Within 1%.
Differential Linearity - Within 2%.
Sweep Magnification Registration - Magnification occurs
about the center of the screen in two line.
Position Range - Any portion of the synchronized video
sweep can be positioned on screen in all sweep modes except
1-Line
and 1-Field.
Synchronization
Internal or External - 1 V composite video or 300 mV
(black to sync tip) sync +6 dB of nominal.
Sync Type - Bi-level or Tri-level.
Remote Sync - TTL level, positive or negative edge, jumper
selectable.