Atec Tektronix-1735 - Manual (Page 2)

Accurate Timing Measurements
To facilitate timing measurements in the critical high
definition environment, up to three signals may be presented
side by side or overlaid. A channel subtraction mode allows
timing comparison using the Bowtie signal. Calibrated
timing is facilitated by a versatile horizontal magnifier.
Full Line Select
Full frame line select, with on-screen readout of line number,
is provided in each television line/field format. The line to be
displayed may be selected at the front panel and a predefined
line may be easily recalled. The selected line is intensified in
the field rate display and on the picture monitor output. A
companion 1720 Series Vectorscope may be connected to
display a vector presentation of a selected line or the full
field signal in composite (NTSC or PAL) applications.
Microprocessor Control
The 1735 HD High Definition Waveform Monitor is a
microprocessor controlled instrument with a nonvolatile
memory. On-screen menus allow selection of operating
standard and screen display functions. Four user-defined
front panel setups are available through a remote input
connector. Also available for remote operation are selection
of sweep rates, input channels and activation of four
line/field display. The companion 1720 Series Vectorscope's
front panel setup follows the 1735 HD selection for quick
recall of desired test and monitoring configurations.
Top of Page
Features
Specs
Ordering Information
Characteristics