Atec Tektronix-1730 Series - Manual (Page 3)

1730–Series Introduction
1–3
Options
The standard instrument is shipped with a P31 (green) phosphor CRT installed.
Option 74 instruments are shipped with a P4 (white) phosphor CRT installed.
Any of the power cord options described in Section 7 can be ordered for the
1730-Series. If no power cord option is ordered, instruments are shipped with a
North American 125 V power cord and one replacement fuse.
Accessories
The following accessories are shipped with the 1730-Series. Part numbers for
these accessories are located at the end of the Replaceable Mechanical Parts list.
1 1730-Series Instruction Manual
1 Power Cord, with selected power plug option
1 Replacement Cartridge Fuse (correct rating for the power
plug option)
3 Replacement Scale Illumination Bulbs (Tektronix Part
No. 150-0168-00 or ANSI #73)
There are a number of accessories that can be used with a 1730-Series Waveform
Monitor. The following is a list of the most common accessory items for this
series of waveform monitors. 1700F items are Field Upgrade Kits that are
installed by the customer; instructions are included in all Field Upgrade Kits.
Viewing Hood (016-0475-00)
Front Panel Cover (200-3897-01)
1700F00, Plain Cabinet (painted silver-grey)
1700F02, Portable Cabinet (painted silver-grey)
1700F05, Side-by-Side Rack Adapter
1700F06, Blank Half-Rack Width Panel
1700F10, DC Power Converter
CRT Options
Power Cord Options
Standard Accessories
Optional Accessories