Pathtrak field view (opt 3 required), Qam view option (opt 4) – Atec Wavetek-SDA-5000-5500-5510 User Manual
Page 10

REVERSE TRANSMITTER
Requires SDA-5000 with OPT 1 or 2
Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 to 1000 MHz
Output Level . . . . . . . . . . . . . . . . . . . +20 to +50 dBmV, adjustable
in 2 dB increments
Spectral Purity . . . . . . . . . . . . . . . . . . Hars -30 dBc; Spurs -35 dBc
TELEMETRY
Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 to 1000 MHz
Modulation. . . . . . . . . . . . . . . . . . . . . . . . . FSK, 100 kHz deviation
Spectrum Required . . . 1.0 MHz vacant bandwidth recommended
Spectral Purity . . . . . . . . . . . . . . . . . . Hars -30 dBc; Spurs -35 dBc
DATA STORAGE
Files stored: Autotests, tilt, channel plans, scan and forward sweep.
Also reverse sweep and reverse amp alignment on SDA-5000 with
OPT 1 and/or 2. Spectrum mode (regular with max hold and
CSO/CTB). Allocated on demand. The storage capability is simulta-
neous—more of one file type can be "traded" for less of another. All
files stored as database, not as screen picture. (Example: Typical mix
of files for 78-channel plan: 8 channel plans, 16 sweep references, 80
sweep traces, 40 scan files, 20 spectrum displays and 20 autotests).
SERIAL INTERFACE
RS232; Epson, IBM, Seiko, and Diconix Printers
INPUT CONFIGURATION
Connector Type. . . . . . . . . . . . . . . . . . . . . . . . . 75
Ω
Type F Female
(Optional 75W Type BNC Female)
Maximum Sustained Voltage. . . . . . . . . . . . . . . AC 100V DC 140V
GENERAL
Display . . . . . . . . . . 320x240 dot matrix LCD, selectable back light
SDA-5000 only
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.2 x 27.9 x 8.9cm
(6” x 11” x 3.5”)
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 kg (5.1 lbs)
(with OPT.1 or 2, 2.5 kg, 5.5 lbs)
Temperature Range Operating . . . . . . . -20 to +47°C (-4 to 117°F)
SDA-5500 and SDA-5510 only
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . 48.3 x 13.3 x 35.6cm
(19” x 5.25” x 14”)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.8 kg (15 lbs)
Temperature Range Operating. . . . . . . . . 0 to +50°C (32 to 120°F)
POWER SOURCES
Battery . . . . . Field extended-life replaceable, nickel metal hydride
12V/3.5A-hr, 4 hours cont. use on a single charge
AC Line (SDA-5000). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Charger Input. . . . . . . . . . . . 100 to 250 VAC, 50 to 60 Hz, 0.5A
Charger Output. . . . . . . . . . . . . . . . . . . Aux out 16V @ 750 mA
Charge 15V @ 750 mA
AC Line (SDA-5500) . . . . . . . . . . . . 100 to 265 to 63 Hz ~100 VAC
47 to 63 Hz ~100VA
NOTES
1) Typical Specifications
2) Relative to 25°C
3) @25°C and +20 dBmV
PATHTRAK FIELD VIEW (OPT 3 REQUIRED)
SDA-5000 and SDA-5500 only
Update Rate . . . . . . . . . . . . . . . . . . . . . . . 2x/second (remote trace)
~1x/second (local trace)
Display Scaling . . . . . . . . . . . . . . . . . . . . . . . .5/1/2/5/10/20 dB/div.
Selectable Nodes. . . . . . . . . . . . . 14 (selectable via PathTrak HCU)
QAM VIEW OPTION (OPT 4)
The QAM View Option can be factory installed in any new or exist-
ing SDA Series instrument. The specifications and features are in
addition to the standard measurement features of the SDA Series.
When ordering, please specify OPT 4A for 8 MHz, DVB-C, ITU-T
J.83 Annex A, or OPT 4B for 6 MHz, DVS-031, ITU-T J.83 Annex B.
MODULATION TYPE
. . . . . . . . . . 64/256 QAM, DVB-C, ITU-T J.83 Annex A (OPT 4A)
. . . . . . . . . 64/256 QAM, DVS-031, ITU-T J.83 Annex B (OPT 4B)
CHANNEL BANDWIDTH
8 MHz (OPT 4A); 6 MHz (OPT 4B)
MEASURABLE INPUT RANGE (LOCK RANGE)
64 QAM. . . . . . . . . . . . . . . . . . . . . . . . . -20 to +50 dBmV (typical)
256 QAM. . . . . . . . . . . . . . . . . . . . . . . . -15 to +50 dBmV (typical)
Carrier to Noise Ratio
Depth of Measurement Characteristics
1
Carrier to Noise Range (dB)
Video Carrier Level (dBmV)
-10
0
10
14
24
0
10
20
30
40
50
60
Out of Measurement Range
+ – 3.0 dB Accur
acy
+ – 2.0 dB Accuracy
CSO / CTB Characteristics
1
Depth of Measurement (dB)
(without preamplification / with preselection)
Video Signal Level (dBmV)
-20
-10
0
10
20
30
0
10
20
30
40
50
60
Out of Measurement Range
+ –
3 dB Accur
acy
+ – 2.5 dB Accuracy
4)
5)