Atec Vibco-Vibrating-Tables - Manual (Page 3)

LOW PROFILE
PLATFORM TABLES PLATFORM TABLES
DRUM PACKER
Low profile drum
packer 3” off floor -
Model SCR-DP
Heavy steel
top for long
wear
Adjustable
speed & force
115 volt heavy
duty vibrator
Runner to
secure to floor
Adjustable brackets for
drums or boxes
Shock absorber to eliminate
vibration transfer
3-drum filling table
Drum packer, 24” x 32” x 3”, powered by two quiet Model
BVS-570 Air Turbine Vibrators, for use in an explosive dust
atmosphere. Load capacity up to 1200 lbs.
Low weight Gaylord packer
with one vibrator
Gaylord
packing
table with
rails for
wood skid
8000 lbs. packing table
VIBCO’s Vibrating Drum Packer is a popular unit for densify-
ing a wide range of material from spices to nails in drums or
cartons. The V-shaped guide holds the drum in place and
prevents it from vibrating off the platform. The SCR-DP table
is 24” wide x 36” long and stands 3” off the floor. It can easi-
ly be slipped under a filling station. The table is equipped with
a 115 volt 1/2 HP 6.5 amp adjustable force and speed vibra-
tor.The vibrator can be adjusted between 0-1400 lbs. of force
and 0-4000 VPM (vibrations per minute). Table capacity is up
to 600 lbs. Shock absorbers provide total isolation between
floor and table.floor. See below for different styles. The low profile tables with two vibrators can be made to
handle up to 10,000 lbs. of material. They stand 6” off the
floor. See below for different styles.
3