Atec Wiltron-Anritsu-69000A-68000B Series - Manual (Page 9)

235
FREQUENCY SYNTHESIZERS, SIGNAL GENERATORS
5
Model/Order
No.
Name
Options
Option 1 Rack mounting kit, includes one set of track slides (90˚ tilt
capability), mounting ears, and front panel handles for
mounting in a standard 19-inch equipment rack
Option 2A Step attenuator (10 dB/step, high-end frequency of ≤ 26.5
GHz, rated output power is reduced)
Option 2B Step attenuator (10 dB/step, high-end frequency of ≤ 40 GHz,
rated output power is reduced)
Option 2C Step attenuator (10 dB/step, high-end frequency of ≤ 50 GHz,
rated output power is reduced)
Option 2D Step attenuator (10 dB/step, high-end frequency of ≤ 60 GHz,
rated output power is reduced)
Option 6 Phase modulation capability FM input and FM generator
become FM/øM input and FM/øM generator (69200A, 68200B,
69300A and 68300B series) Not available with option 7
Option 7 Generators deletes the internal AM and FM generators
(69200A, 68200B, 69300A and 68300B series). External AM
and FM capability remains unchanged. Not available in
combination with Option 6, 8, 10 or 20
Option 8 Internal power meter adds an internal power (69200A, 68200B,
69300A and 68300B series) compatible with 560-7, 5400-7, or
6400-71 series detectors. Not available with Option 7
Option 9 Rear panel RF output (moves RF output connector to the rear panel)
Option 10 Complex modulation (user defined modulation includes serial
cable and Windows
® based software) (69200A, 68200B,
69300A and 68300B series) ( * Not available with Option 7)
Option 11 0.1 Hz frequency resolution (provides frequency resolution of
0.1 Hz)
Option 14 Wiltron 360B VNA compatibility (modifies rack mounting
hardware to mate unit in Wiltron 360B VNA console)
Option 15 High power output (provides high-power from 2 to 26.5 GHz)
Option 16 High stability time base (adds an ovenized, 10 MHz crystal
oscillator as a high-stability time base)
Option 17 Delete front panel (deletes the front panel for use in remote
control applications where a front panel display and keyboard
control are not needed)
Option 18 MM-wave bias (rear panel bias output to drive 54000-XX
WRXX multiplier. BNC twinax: not available with Option 20)
Option 19 SCPI programmability adds GPIB command mnemonics
complying with Standard Commands for Programmable
Instruments (SCPI), Version 1993.0. SCPI programming
complies with IEEE 488.2–1987
Option 20 SCAN modulator (adds an internal SCAN modulator for
simulating high-depth amplitude modulated signals in models
68237B, 68337B, 68247B and 68347B only. Requires an
external modulating signal input: not available in combination
with Option 7 or Option 18)
* 1: K female output connector
* 2: V female output connector
Model/Order
No.
Name
Accessories
34RKNF50 Ruggedized K-to-Type N Female Adapter (DC to 20 GHz)
34VKF50 V Male-to-K Female (DC to 46 GHz)
34RVNF50 Ruggedized V-to-Type N Female Adapter (DC to 20 GHz)
ND36329 MASTER/SLAVE interface cable
761-69 Protective front panel cover
760-177 Transit case
2300-16 69100A/68100B/68100A instrument driver for national
instruments LabWindows
® Ver. 2.2
2300-19 69200A/68200B/68300B instrument driver for national
Instruments LabWindows
® Ver. 2.2
2300-20 69000A/68000B instrument driver for national instruments
LabWindows
® Ver. 2.2