Atec Tektronix-TDS600C Series - Manual (Page 3)

page 3
TDS 600 Series
Characteristics
Continued TIMEOUT: Trigger on an event which
remains high, low, or either, for a specified
time period, selectable from 1ns to 1 s,
with 200ps resolution.
TLA Cross Trigger (TDS 694C only) –
Utilize
a TLA700 logic analyzer to detect a multi-
channel event, then trigger the TDS 694C.
The trigger points on the TLA and TDS will
be aligned in time.
VIDEO (Optional; Not Available in
TDS 694C) –
Trigger on a particular line of individual,
odd/even, or all fields. Trigger on a specific
pixel of a line by using the video trigger with
delay by events. Choose positive or negative
horizontal sync polarity.
525/NTSC: Choose monochrome or color
(studio-quality NTSC) sync formats.
625/PAL: Choose color or monochrome
(studio-quality PAL) sync formats. HDTV:
Choose from 1125/60, 1050/60, 1250/50,
and 787.5/60 HDTV formats.
Trigger Bandwidth (Edge Type) –
3 GHz (TDS 694C).
1 GHz (TDS 684C, TDS 680C).
500 MHz (TDS 654C).
Main Trigger Modes –
Auto, Normal, Single.
Delayed Trigger – Delay by time, events, or
events and time.
Delay by Time Range –
16ns to 250 s.
Delay by Events Range – 2 to 9,999,999
events.
External Trigger Input –
Input Impedance:
>1.5 k Ω ; Max. InputVoltage: ±20V (DC +
peak AC).
DISPLAY CHARACTERISTICS
Waveform Style – Dots, vectors, variable
persistence from 32 ms to 10 s, infinite per-
sistence, and intensified samples.
Color (TDS 694C, TDS 684C, TDS 654C) –
Standard palettes and user-definable color
for waveforms, text, graticules, and cursors.
Measurement text and cursor colors
matched to waveform. Waveform collision
areas highlighted with different color. Sta-
tistical waveform distribution shown with
color grading through variable
persistence.
Color Grading (TDS 694C, TDS 684C,
TDS 654C) –
With variable persistence
selected, historical timing information is
represented by temperature or spectral
color scheme (or gray scale on TDS 680C)
providing "z-axis" information about rapidly-
changing waveforms.
Graticules –
Full, grid, cross-hair, frame,
and NTSC and PAL (with video trigger
option).
Format –
YT and XY.
Resolution – 640 horizontal by 480 vertical
displayed pixels (VGA).
Color CRT Monitor (TDS 654C/684C/694C) –
7 in. diagonal NuColor
™ liquid crystal full-color
shutter, 256 levels.
Monochrome CRT Monitor (TDS 680C) –
7 in. diagonal, magnetic deflection.
Horizontal raster-scan. P4 white phosphor.
MEASUREMENT SYSTEM
Automatic Waveform Measurements –
Period, frequency, + width, –width, rise
time, fall time, + duty cycle, –duty cycle,
delay, phase, burst width, high, low, max,
min, peak to peak, amplitude, + overshoot,
–overshoot, mean, cycle mean, RMS, cycle
RMS, area, cycle area, extinction ratio
(ratio,dB, %), and mean optical power.
Continuous update of up to four measure-
ments on any combination of waveforms.
Measurement Statistics –
Display mini-
mum and maximum or mean and standard
deviation on any displayed single-waveform
measurements.
Cursor Measurements –
Absolute,
Delta:Volts, Time, Frequency, and NTSC
IRE and line number (with video trigger
option).
Cursor Types –
Horizontal bars (volts), ver-
tical bars (time); operated independently or
in tracking mode.
Histogram Measurements –
Mean, median,
standard deviation, hits, waveform count,
peak hits, peak to peak, % mean ± 1, 2, and
3 standard deviations.
WAVEFORM PROCESSING
Waveform Functions – Interpolation (sin(x)/x
or linear), Average, Envelope, Auto Setup.
Advanced Waveform Functions –
FFT,
Integration, Differentiation, Waveform (math
or acquired) Limit Testing.
Arithmetic Operators –
Add, Subtract,
Multiply, Divide, Invert.
Waveform Limit Testing –
Compares
incoming or math waveform to a reference
waveform’s upper and lower limits.
Waveform Histograms –
Both vertical and
horizontal histograms, with periodically
updated measurements, allow statistical
distributions to be analyzed over any region
of the signal.
Dual Window Zoom –
Dual graticules
simultaneously show selected and zoomed
waveforms. Up to two zoom boxes show
areas on the selected trace that are being
magnified, and the two magnified areas can
be overlapped for quick comparison. Color
of zoomed trace matches selected trace.
POWER REQUIREMENTS
Line Voltage Range – 90 to 250V RMS.
Line Frequency – 45 to 440Hz.
Power Consumption –
300 W max. (TDS 654C/680C/684C)
450 W max. (TDS 694C)
ENVIRONMENTAL AND SAFETY
Temperature –
Operating: +4°C to +45°C (floppy not used),
+10°C to +45°C (floppy in use). Non-operat-
ing:–22°C to +60°C.
TDS 694C: Operating: +5°C to +40°C
(floppy not used), +10°C to +40°C (floppy in
use). Non-operating:–22°C to +60°C.
Humidity –
Operating: 20% to 80% RH at or below
+32°C.