Atec Tektronix-TDS5000B Series - Manual (Page 11)

Digital Phosphor Oscilloscopes • www.tektronix.com/tds5000b 11
Digital Phosphor Oscilloscopes
TDS5000B Series
Recommended Probes
P5050 – 500 MHz, 10x passive probe.
P6243 – 1.0 GHz active probe.
P6245 – 1.5 GHz active probe.
P6246 – 400 MHz differential probe.
P6247 – 1.0 GHz differential probe.
P6248 – 1.7 GHz differential probe.
Recommended Accessories
Service Manual – Order 071-1362-00.
Transit Case – Order 016-1937-00.
Probe Calibration, Compensation, and Deskew
Adapter – Order 067-0405-xx.
Power Deskew Fixture – Order 067-1478-00.
Extra Front Panel Removable Hard Drive –
Order 065-0692-00.
Video Display Clamp – Order 013-0278-xx.
Thermal Printer Paper – Order 016-1897-00.
Mini Keyboard – Order 118-9402-00.
Instrument Options (available
on all models unless indicated
otherwise)
Opt. 18 – Touch-screen interface.
Opt. 3M – Increase record length to 16M samples
max (1ch.).
Opt. 1P – Built-in thermal printer.
Opt. FHD *1 – Front panel removable hard drive
(replaces FDD and internal HDD).
Opt. 1K – Oscilloscope cart.
Opt. 1R – Rackmount kit.
Opt. SM – Communication mask testing.
Opt. CP2 *2 – TDSCPM2 - ANSI/ITU telecom
pulse compliance testing software.
Opt. DVD – TDSDVD - Optical storage
analysis software.
Opt. ET3 *3 – TDSET3 - Ethernet compliance
test software.
Opt. J2 *4 – TDSDDM2 - Disk drive measurements
software.
Opt. J3E *5 – TDSJIT3E - Jitter and timing analysis
software essentials.
Opt. JT3 *5 – TDSJIT3 - Jitter and timing analysis
software with Rj/Dj and BER.
Opt. PW3 – TDSPWR3 - Power measurements
software.
Opt. USB *5 – USB 2.0 Compliance test
software only.
* 1 No upgrade path for this option, must be ordered at time
of initial purchase.
* 2 Requires option SM.
* 3 Not available on TDS5054BE
* 4 Not available on TDS5032B and TDS5034B.
* 5 Not available on TDS5032B and TDS5052B.
Power Plug Options
Opt. A0 – North America.
Opt. A1 – Universal Euro.
Opt. A2 – United Kingdom.
Opt. A3 – Australia.
Opt. A4 – 240 V North America.
Opt. A5 – Switzerland.
Opt. A6 – Japan.
Opt. A10 – China.
Opt. A99 – No power cord or AC adapter.
Manual Options
Opt. L0 – English manual.
Opt. L1 – French manual.
Opt. L3 – German manual.
Opt. L5 – Japanese manual.
Opt. L7 – Simple Chinese manual.
Opt. L8 – Traditional Chinese manual.
Opt. L9 – Korean manual.
Opt. L10 – Russian manual.
Service Options
Opt. C3 – Calibration Service 3 Years.
Opt. C5 – Calibration Service 5 Years.
Opt. D1 – Calibration Data Report.
Opt. D3 – Calibration Data Report 3 Years
(with Option C3).
Opt. D5 – Calibration Data Report 5 Years
(with Option C5).
Opt. R3 – Repair Service 3 Years (including
warranty).
Opt. R5 – Repair Service 5 Years (including
warranty).
Instrument Upgrades
Upgrades equivalent to original options can be
ordered to extend instrument performance after
initial purchase. Users can install upgrades without
opening the instrument case or requiring on-site
service (except for touch-screen upgrade). To
upgrade, order a TDS5BUP with one or more
of the following options: 18, 1K, M03, 1P, 1R,
SM, CP2, DVD, ET3, J2, J3E, JT3, PW3, USB.
Factory installation of selected options is available
by ordering option IF on your TDS5BUP
upgrade order.