Atec Teseq-Schaffner-NSG3040 - Manual (Page 4)

A d v a n c e d Te s t S o l u t i o n s f o r E M C
THE SMART 4 KV SOLUTION FOR CE APPLICATIONS
NSG 3040
Internal coupling network
Parameter Value
Decoupling attenuation: Remanent pulse 15% max.
Mains side crosstalk 15% max.
Mains decoupling: 1.5 mH 0% + 35%
Connections: Back panel:
EUT supply: Harting connector
Additional ground connector
Instrument supply 230/115 VAC
Front panel:
EUT connector IEC 320
HV coaxial
Connector surge high & low
EUT supply: 1-phase
EUT VAC: 24 to 260 Vrms, 50/60 Hz (phase - neutral), 400 Hz max.
EUT VDC: 0 to 260 VDC
EUT current 1 x 16 Arms continuous (temperature controlled)
1 x 25 Arms for 15 min
EFT (Burst) Standard coupling all lines to ref ground (GND)
IEC/EN 61000-4-4
L, N, PE  ref GND
Any lines and combinations to ref GND:
L  ref GND
N  ref GND
PE  ref GND
L, N  ref GND
L, PE  ref GND
N, PE  ref GND
PQT: Dips & drops to phase L
Field: 1 to max. 40 A/m (in 1 A/m steps)
Frequency: 50/60 Hz
Coil factor: 0.01 to 99.99
Test duration: 1 to 9’999 pulses, continuous
Power magnetic field in conjunction with MFO 6501 / MFO 6502 and INA 70x
conforms to IEC/EN 61000-4-8