Atec Rosemount-Hart-475 - Manual (Page 4)

Rugged and Reliable
It’s called “Field Communicator”
for a reason. Some tasks just
have to be performed at the
device in the field. The 475 Field
Communicator is designed for
tough use in your plant or mill.
Its large keys and physical
navigation buttons allow for
one-handed operation, even with
your work gloves on. The rugged
display is designed to take the
knocks and shocks from normal
use in the plant.
The 475 Field Communicator’s
Protective Rubber Boot provides
added protection in the field and
in your toolbox. Both the rubber
boot and 475 housing are
designed in accordance with
Intrinsic Safety standards to limit
Intrinsically Safe
The 475 Field Communicator
meets the Intrinsic Safety
requirements of the listed
regulatory agencies and
standards. All of the available
Hazardous Locations approvals
are provided in a single model
option (see Ordering Information).
– CENELEC/ATEX
– Factory Mutual (FM)
– Canadian Standards
Association (CSA)
– FISCO
– IECEx
Page 4
the build up of static electrical
energy.
The 475 Field Communicator is
designed, manufactured, and
tested to very demanding
specifications. It is ready to go
wherever you need to go to get
the job done.
ATEX
The 475 Field Communicator, with its handy carrying case, provides a single tool for configuring and diagnosing HART
and F OUNDATION fieldbus devices.
Even the power module is
approved for installation in
hazardous areas.
The protective rubber boot provides
added protection in the field.
Product Data Sheet
July 2010