Atec JDSU-JD746A - Manual (Page 6)

6
Ordering Information
JD746A CELLADVISOR RF ANALYZER
Optional Calibration Kits
Part Number Description
JD72450509
Y-calibration kit, Type-N(m), DC to 6 GHz, 50 Ω
JD72450510 Y-calibration kit DIN(m), DC to 4 GHz, 50 Ω
JD71050507 Dual-port Type-N calibration kit, 50 Ω
• Y-calibration kit, Type-N(m), DC to 4 GHz, 50 Ω
• Two adapters Type-N(f) to Type-N(f), DC to 4 GHz, 50 Ω
• Two 1 m RF test cables, Type-N(m) to Type-N(m),
DC to 18 GHz, 50 Ω
JD71050508 Dual-Port DIN calibration kit, 50 Ω
• Y-calibration kit DIN(m), DC to 4 GHz, 50 Ω
• Two 1 m RF test cables, Type-N(m) to Type-N(m),
DC to 18 GHz, 50 Ω
• Adapter Type-N(f) to DIN(f), DC to 4 GHz, 50 Ω
• Adapter Type-N(f) to DIN(m), DC to 4 GHz, 50 Ω
• Adapter DIN(f) to DIN(f), DC to 4 GHz, 50 Ω
• Adapter DIN(m) to DIN(m), DC to 4 GHz, 50 Ω
Optional RF Cables
Part Number Description
G710050530
1.0 m (3.28 ft) RF cable, DC to 18 GHz, Type-N(m) to Type-N(m), 50 Ω
G710050531 1.5 m (4.92 ft) RF cable, DC to 18 GHz, Type-N(m) to Type-N(f), 50 Ω
G710050532 3.0 m (9.84 ft) RF cable, DC to 18 GHz, Type-N(m) to Type-N(f), 50 Ω
G710050533 1.5 m (4.92 ft) RF cable, DC to 18 GHz, Type-N(m) to SMA(m), 50 Ω
G710050534 1.5 m (4.92 ft) RF cable, DC to 18 GHz, Type-N(m) to QMA(m), 50 Ω
G710050535 1.5 m (4.92 ft) RF cable, DC to 18 GHz, Type-N(m) to SMB(m), 50 Ω
Standard
Part Number Description
JD746A
100 kHz to 4 GHz spectrum analyzer
5 MHz to 4 GHz cable and antenna analyzer
1
10 MHz to 4 GHz RF power meter (internal mode)
Options
NOTE: Upgrade options for the JD746A use the designation JD746AU
before the respective last three-digit option number.
Part Number Description
JD746A001
2-Port Transmission Measurement 2
JD746A002 Bias-Tee 3
JD746A003 CW Signal Generator
JD746A006 Bluetooth connectivity 4
JD746A010 GPS Receiver and Antenna
JD746A011 Interference Analyzer 5, 6
JD746A012 Channel Scanner
JD746A013 Optical Power Meter 7
Standard Accessories
Part Number Description
G710550326
AC/DC power adapter 8
G710550335 Cross LAN cable (1.5 m) 8
GC73050515 USB A to B cable (1.8 m) 8
GC72450518 >1 GB USB memory 8
G710550325 Rechargeable lithium ion battery 8
G710550323 Automotive cigarette lighter 12 VDC adapter 8
G710550316 Stylus 8
JD740A361 JD740A series user’s manual and application software — CD
1. Requires calibration kit
2. Requires dual-port calibration kit
3. Requires Option 1
4. Includes a pair of Bluetooth USB dongles with 5 dBi dipole antenna (JD70050006)
5. Highly recommend adding GPS receiver JD746A010
6. Highly recommend adding antennas G70005035x and/or G70005036x
7. Requires optical power sensors MP-60 or MP-80
8. Standard accessory that can be purchased separately