Atec JDSU-JD746A - Manual (Page 5)

5
JD746A CELLADVISOR RF ANALYZER
General Information
Inputs and Outputs
RF in Spectrum analyzer
Connector
Impedance
Damage level Type-N, female
50 Ω (nominal)
>+40 dBm, ±50 VDC (nominal)
Reflection/RF out Cable and antenna analyzer
Connector
Impedance
Damage level Type-N, female
50 Ω (nominal)
>+37 dBm, ±50 VDC (nominal)
RF in Cable and antenna analyzer
Connector
Impedance
Maximum level Type-N, female
50 Ω (nominal)
>+25 dBm, ±50 VDC (nominal)
External trigger, GPS
Connector
Impedance
SMA, female
50 Ω (nominal)
External ref
Connector
Impedance
Input frequency
Input range
SMA, female
50 Ω (nominal)
10 MHz, 13 MHz, 15 MHz
–5 to +5 dBm
USB
USB host
1
USB client 2
Type A, 1 port
Type B, 1 port
LAN RJ45, 10/100Base-T
GPIO RJ45
Audio jack 3.5 mm headphone jack
External power 5.5 mm barrel connector
Speaker Built-in speaker
Display
Type Resistive touch screen
(as of serial number BEK11791)
Size 8 inch, LED backlight
Resolution 800 x 600
Power
External DC input 12 to 19 VDC
Power consumption 32.5 W 45 W maximum
(when charging battery)
Battery
Type 10.8 V, 7800 mA/hr (Lithium ion)
Operating time >3 hours (typical)
Charge time 2.5 hours (80%), 4 hours (100%)
Charging temperature 0 to 45°C (32 to 113°F) ≤85% RH
Discharging temperature –10 to 60°C (14 to 140°F) ≤85% RH
Storage temperature 3 –20 to 50°C (–4 to 122°F)
≤85% RH (noncondensing)
Data Storage
Internal 4 Minimum 20 MB
External 5 Limited by size of USB flash drive
Environmental
Operating temperature
AC Power
0 to 40°C (32 to 104°F) with no derating
Battery 0 to 40°C (32 to 104°F) at charging
–10 to 55°C (14 to 131°F) at discharging
Maximum humidity ≤85% RH (noncondensing)
Shock and vibration MIL-PRF-28800F Class 2
Storage temperature 6 –30 to 71°C (–22 to 160°F)
EMC
EN 61326-2-1 Complies with European EMC
Size and Weight (Standard configuration)
Weight (with battery) <4 kg (8.8 lb)
Size (W x H x D) 295 x 195 x 82 mm
(11.6 x 7.7 x 3.2 in)
Warranty
2 years
Calibration Cycle
1 year
1. Connects flash drive and power sensor
2. Connects to PC for data transfer
3. 20 to 85% RH, store battery pack in low-humidity environment;
extended exposure to temperatures above 45°C could significantly degrade battery
performance and life
4. Up to 700 traces
5. Supports USB 2.0 compatible memory devices
6. With the battery pack removed