Atec Kikusui-PLZ6000R - Manual (Page 2)

PLZ6000R
Applications
Regenerative Electronic Load
Regenerative DC Electronic Load
PLZ6000R is a DC electronic load that regenerates load power to the AC line.
Regular electronic loads consume load power by having semiconductor devices convert it into heat. By
contrast, PLZ6000R converts load power into reusable electric power, rather than converting it into heat as is
typically done, and feeds this power to the AC line, thereby substantially reducing the amount of waste energy.
PLZ6000R is an environment-friendly electronic load that can contribute signifi cantly to your energy saving
efforts.
Large capacity
6
kW
NEW
Environment-friendly DC electronic load of the power line regeneration type
Capable of regenerating power with clean current waveforms
Aging and evaluation testing for DC/DC converters and various types of power
supplies
Evaluation and durability testing for alternators and motor generators
Discharge testing for different types of batteries (lead, lithium, and assembled
batteries)
Dummy load testing for equipment powered by natural energy (solar cells and
wind power generation)
Evaluation testing for fuel cells and stacks
[Note] This product is intended for in-plant power generation only. (It does not feed its generated power back to the electric power
system.)
This product cannot be used unless 5.4 kW or more of power is consumed by each power distribution system per one unit.
Compact size
430 mm (W) × 173 mm (H) × 550 mm (D)
16.93 W × 6.81 H × 21.65 D inches
Power regeneration
effi ciency of up to 90%