Atec Mitutoyo-SJ-310 - Manual (Page 11)

11
Optional Accessories: For External Equipment
By connecting this printer to the Surftest SJ-310's digimatic
output, you can print calculation results, perform a variety
of statistical analyses, draw a histogram or D chart, and also
perform complicated operations for X-R control charts.
A footswitch is used to trigger measurement. This tool is
very useful in cases where you need to measure the same
workpiece multiple times using jigs and other fixtures.
This unit allows you to load Surftest SJ-310 calculation
results (SPC output) into commercial spreadsheet software
on a PC via a USB connector. You can essentially use a one-
touch operation to enter the calculation results (values) into
the cells in the spreadsheet software.
USB keyboard signal conversion type*
IT-012U
No.264-012-10
* Requires the optional Surftest SJ-310
connection cable.
1m: No.936937
2m: No.965014
USB Input Tool Direct
USB-ITN-D
No.06ADV380D
Optional accessories and consumables for SJ-310
Digimatic mini processor DP-1VR
Footswitch
Calculation results input unit INPUT TOOL
This unit allows you to remotely load Surftest SJ-310
calculation results (SPC output) into commercial spreadsheet
software on a PC.
You can essentially use a one-touch operation to enter the
calculation results (values) into the cells in the spreadsheet
software.
Measurement Data Wireless Communication System U-WAVE
U-WAVE-T *
(Connects to the SJ-310)
No.02AZD880D
* Requires the optional Surftest SJ-310
connection cable.
No.02AZD790D
U-WAVE-R
(Connects to the PC)
No.02AZD810D
No.12AAJ088
• Printer paper (5 rolls) No.270732
• Durable printer paper (5 rolls) No.12AAA876
• Touch-screen protector sheet (10 sheets) No.12AAN040
• Memory card (2GB) * No.12AAL069
• Connecting cable (for RS-232C) No.12AAA882
* micro SD card (with a conversion adapter to SD card)
No.264-504-5A
SJ-310→DP-1VR Connecting cable
1m: No.936937
2m: No.965014