beautypg.com

G−858 magmapper™ specifications – Atec Geometrics-G-858 User Manual

Page 4

background image

G−858 MagMapper™ SPECIFICATIONS



MAGNETOMETER / ELECTRONICS

Operating Principle: Self-oscillating split-beam Cesium Vapor (non-
radioactive Cs

133

) with automatic hemisphere switching.

Operating Range: 20,000 nT to 100,000 nT
Operating Zones: For highest signal-to-noise ratio, the sensor long axis
should be oriented at 45

,

30to the earth’s field but operation will continue

through 45

,

35

. Sensor is automatic hemisphere switching.

Sensitivity Statistics: 90% of all reading will fall within the following Peak-
to-Peak envelopes:

0.03 nT at 0.2 sec cycle rate

0.02 nT at 0.5 sec cycle rate

0.01 nT at 1.0 sec cycle rate

Noise: < 0.008 nT/

Hz-RMS

Heading Error: < 1.5 nT including backpack and GPS
Gradient Tolerance: > 500 nT /inch (>20,000 nT/ meter)
Temperature Drift: < 0.05 nT per

C

Cycle Rate: Variable from 0.1 sec to 1 hr in 0.1 sec steps or by external
trigger.
Data Storage: Non-volatile RAM with capacity for 8 to 12 hrs of
magnetometer, time, event marks, field notes and XYZ or GPS locations.
Audio Output:

1. Audio tone of field variation; pitch and volume adjustable. (Search

mode)

2. Audio pulse each 1 second (Pace metronome).
3. Alarm for loss of signal, low battery or quality control setting exceeded.

Data Output: Three wire RS-232 standard serial port, optional continuous
real time transmittal of data via RS-232 to PC. Total memory output transfer
time less than 5 min. at 115,200 baud.
Visual Output: 320 x 200 graphic liquid-crystal display, daylight visible
with selectable outputs for:

1. Data display: Up to 5 stacked profiles, real time or review mode. Survey

grid showing boundaries and position.

2. All system set-up functions, e.g., memory status, data transfer, sample

time.

3. All Survey set-up functions, e.g., survey profile number and direction,

station number or GPS data transfer protocol, line number.

4. Survey monitoring functions, e.g. total field, noise level, profile number

x or x-y coordinates.

Internal Clock: Resolution of 0.1 sec, drift: < 1 sec/day
Battery Life:

1.

24 VDC rechargeable gel cell, 6 hrs for Mag w GPS. Magnetic
effect less than 1.5 nT (γ) at 4 ft

2.

Internal backup battery for clock and non-volatile RAM.

Software: Supplied as part of the basic system and including functions for:

Operating Software:

1. Survey Modes:

a. Search survey
b. Simple survey
c. Map survey, station or continuous
d. Base station

2. Data acquisition/display:

a. Acquire and store data and survey functions.
b. Display profiles, total field to 0.1 nT resolution, survey / map

parameters and diagnostics.

Post-acquisition Software: MagMap2000 software for installation on

customer’s computer.

1. Data transfer and corrections:

a. Transfer of data from the field Magnetometer

GPS, or Base station to PC.

b. Diurnal correction using base station data.
c. Processing the corrected data into ASCII values of X-Y-Z.

2. Data Processing functions include spike editing, spline filtering,

repositioning of X, Y, Z or GPS Lat/Long, conversion to UTM
coordinates, profile and contour map plotting..

MECHANICAL

Sensor: 2-3/8” dia., 6-3/4” long, 12 oz. (6cm x 15 cm, 340 grams)
Backpack: Backpack for Magnetometer, 9.5 lb (4.3 kg). Includes Nylon
chest harness with all cables attached (1 kg to 1.3 kg)
Battery: 3” H, 5” W, 8” L, 3.5 lbs (8 cm x 13 cm x 20 cm, 1.6 kg) belt-
mounted, attaches to harness.
Console: 6” W, 3” H, 11?”L, 3.5 lbs. (15 cm x 8 cm x 28cm, 1.6 kg), attaches
to battery belt and harness. Magnetic effect less than 1 nT at 4 ft

ENVIRONMENTAL

Operating Temperature: -25

C to +50

C (-13

F to + 122

F)

Storage Temperature: -35

C to + 60

C (-30

F to + 140

F)

Water Tight: Weatherproof in driving rain
Shock: Survive a 3 ft drop onto a hard surface

WARRANTY

: 1 YEAR on G-858 and sensor, one year on accessories


Novatel Smart V1™ Specs:


• Code and carrier phase tacking with 1Hz (optional 20 Hz) Position,

velocity, time output or optional 20 Hz raw data output

• SBAS capable and designed for harsh environments
• RS-232, RS-422 compatible interface
Hardware Specs:
Size and Weight

115mm dia x 90mm height, Weight: 575 g

Input Voltage:

+9 to +28 VDC

Power Consumption:

1.8W (typical)

Com Ports:

1 RS-232 (optional 2 RS-232) at up to 19,200

baud

Operating Temperature:

-40°C to +75° C


GPS L1 Product Performance

Position Accuracy:

Single point L1

<5 m CEP

WAAS L1

<1.5m CEP

Measurement Precision:

L1 C/A Code

18 cm RMS

L1 Carrier Phase

1.5 mm RMS

Data Rates:

Measurements

1 Hz (optional 20 Hz)

Position

1 Hz (optional 20 Hz)

Time to First Fix:

Cold Start

60 s

Warm Start

45 s

Hot Start

35 s

Signal Reacquisition:

0.5 s typical

GEOMETRICS INC.

2190 Fortune Drive, San Jose, California 95131, USA V1.3 06-20-2012

Tel: 408-954-0522

– Fax: 408-954-0902 – Email

: [email protected]


GEOMETRICS EUROPE

20 Eden Way, Pages Industrial Park, Leighton Buzzard LU7 4TZ, UK

Tel: 44-1525-383438

– Fax: 44-1525-382200 – Email

: [email protected]


GEOMETRICS CHINA

Laurel Technologies, Ste 1807-1810,

Kun Tai Int’l Mansion, #12B, Chaowai St., Beijing 100020, China

Tel: 86-10-5879-0099

– Fax: 86-10-5879-0989 – Email:

[email protected]