Atec Panametrics-Olympus-DF868 - Manual (Page 6)

GE
Sensing
DF868
Specifications
Temperature Ranges
• Standard: -40°F to 212°F (-40°C to 100°C)
• Optional (overall range): -310°F to 1112°F
(-190°C to 600°C)
Pressure Ranges
• Standard: 0 to 3,000 psig (1 to 207 bar)
• Optional: Higher pressures on request
Materials
• Standard: Stainless steel
• Optional (for Pan-Adapta® plugs): Titanium,
Hastelloy® alloy, Monel® alloy, duplex,
Pan-Adapta plugs allow installation and removal of
wetted transducers without interrupting the process or
emptying the pipe.
Process Connections
• Standard: 1 in or 3/8 in NPTM
• Optional: RF flanged, socket weld, fuse bond and
others
Mountings
Flanged flowcell, hot tap or cold tap
Area Classifications
• Standard: General purpose
• Optional: Weatherproof Type 4/IP65
• Optional: Explosion-proof Class I, Division 1,
Groups C&D; Class II, Groups E,F&G; Class III
• Optional: Flameproof ( II 2 G EEx d IIC T6)
• Optional: Submersible
MCerts Product Conformity Certificate
Sira MC 050061/00 for continuous water monitoring
(EU IPPC)
Wetted Ultrasonic Flow Transducers
Transducer Cables
• Standard: One pair of coaxial cables, type RG62 AU, or
as specified for transducer type
• Optional: Lengths up to 1,000 ft (330 m) maximum
High-Temperature and High-Pressure
Ultrasonic Flow Transducers
Bundle Waveguide Technology™ System transducer and
holder (see BWT™ System specifications)
Measurement
Energy Measurement
Calculates energy flow rate and totalized energy.
Requires optional RTD or analog I/O board.
Temperature Transducers
Loop-powered, three-wire, platinum RTDs; clamp-on and
wetted (thermo-well) types are available
Accuracy
±0.08°F ±0.15°C with wetted RTDs (matched pairs)
Range
-4°F to 500°F (-20°C to 260°C)
The accuracy of the energy measurement is a
combination of the accuracy of the associated flow and
temperature measurements. 1% to 2% of reading is
typical for calibrated systems. Not all extremes of
parameters can be achieved simultaneously.
Additional Options
PanaView™ PC-Interface Software
The DigitalFlow DF868 communicates with a PC through
a serial interface and Windows® operating systems.
Consult the manual for details on sites, logs and other
operations with a PC.