Atec Haefely-AXOS Series - Manual (Page 14)

14 AXOS SERIES
GENERAL DATA
Control power
85 V - 264 V
50/60 Hz Dimensions
(W x H x D) 22“ / 6U
(45 x 27 x 50 cm)
User test storage unlimited Weight 30 kg
Remote interface Ethernet, RJ45 USB for USB memory stick
Display 7“ / 800x480 / 24 bit
with touch-screen AUX. interface D-sub 37p for external
CDN, external trans-
former etc.
External trigger
input 5 V TTL Synch input BNC, 10 V – 264 V AC
Trigger output 5 V TTL External start / stop
input 5 V TTL, starts / stops
predefined test se-
quence
EUT failed input 5 V TTL Analog output 0 – 10 V, for use with
external options
Warning lamp
output 2 x 24 V / 1 A DC Safety circuit stops the test when
unlocked
IEC / EN 61000-4-4 EDITION 2 & 3 EFT / BURST
Output voltage
0.2 – 5.0 kV ±10% at
coaxial output Spike frequency 1 Hz – 1 MHz
Polarity pos / neg / alternate Burst duration 10 us – 1 s
Output impedance 50 Ohms Burst period 1 ms – 10 s
Rise time 5 ns ±30% Test time 1 s– 1000 minutes
Impulse duration 50 ns ±30% at 50
Ohm
50 ns –15 +100 ns at
1000 Ohm Trigger automatic, manual,
external trigger input
Burst mode normal, continuous,
real, random Integrated single
phase coupling /
decoupling network 264 V AC / 16 A
220 V DC / 10 A
IEC / EN 61000-4-5 EDITION 2 & UPCOMING EDITION 3 SURGE COMBINATION WAVE
Output voltage
0.2 – 7.0 kV ±10% Output current 0.1 – 3.5 kA ±10%
Voltage rise time 1.2 us ±30% Current rise time 8 us ±20%
Voltage duration 50 us ±20% Current duration 20 us ±20%
Polarity pos / neg / alternate Integrated single
phase CDN 264 V AC / 16 A
220 V DC / 10 A
Output impedance 2 Ohms
Phase sync 0 – 359° with 1° steps
or asynchronous
mode Impulse trigger automatic 2 s – 100 min
manual
external trigger input
Counter preselect 1 – 1000 / infinite
Counter 100000
Peak voltage
monitor BNC output: 1000:1
display: 3 digits Peak current
monitor BNC output: 1 kA/V
display: 3 digits
TECHNICAL DATA - AXOS 8