Atec Rohde-Schwarz-FSL3-FSL6 - Manual (Page 4)

4 Spectrum Analyzer ¸FSL
With phase noise of typ. –103 dBc (1
Hz) at 10 kHz from the carrier, a third or-
der intercept point of typ. +15 dBm, a
bandwidth range from 10 Hz to 10 MHz,
and a displayed average noise level
(DANL) of –152 dBm, the ¸FSL com-
pares favorably with high-end analyz-
ers. This makes it very useful in pro-
duction, service, field use and in labs.
The RF attenuator, which is ad-
justable in steps of 5 dB, and
the optional preamplifier
ensure an optimum usable
dynamic range.
Exceptional performance for its class
¸FSL3, model .03 ¸FSL3, model .13 ¸FSL6, model .06 ¸FSL6, model .16
Frequency range 9 kHz to 3 GHz 9 kHz to 3 GHz 9 kHz to 6 GHz 9 kHz to 6 GHz
Frequency accuracy 1 × 10 –6
With ¸FSL-B4, OCXO 1 × 10 –7
Resolution bandwidths
Standard 300 Hz to 10 MHz in 1/3 sequence
With ¸FSL-B7 10 Hz to 10 MHz in 1/3 sequence, additionally 1 Hz (FFT filter)
Video bandwidths 10 Hz to 10 MHz
I/Q demodulation bandwidth 20 MHz
Phase noise typ. –103 dBc(1 Hz) at 10 kHz from carrier, 1 GHz
DANL
With 300 Hz RBW typ. –117 dBm
With 1 Hz FFT RBW and pre-
amplifier
(options ¸FSL-B7, -B22) typ. –152 dBm
TOI 10 dBm
Detectors pos/neg peak/auto peak, RMS, quasi-peak, average, sample
Level measurement uncer-
tainty <0.5 dB
Tracking generator no yes no yes
Frequency range 1 MHz to 3 GHz 1 MHz to 6 GHz
Output level –20 dBm to 0 dBm –20 dBm to 0 dBm
Condensed specifications