Atec Keytek-EMCPro-PLUS - Manual

Analyze • Detect • Measure • Control TM
Technical Specifications
KeyTek EMCPro ® PLUS
Advanced EMC test system for
compliance testing to 6 IEC/EN standards
The newly configured KeyTek EMCPro ® PLUS
test system features resident capabilities for EMC
CE Mark compliance testing to 6 IEC/EN standards,
and fully addresses new requirements for a 100 kHz
burst rate per IEC 61000-4-4, Edition 2 (EFT) and 80%
dip per IEC 61000-4-11, Edition 2 (PQF
™ ).
Portable and low cost, the KeyTek EMCPro PLUS
is the answer to manufacturers’ demand for a
mid-range, multi-capability EMC immunity tester.
It’s ideal for companies who require flexibility,
versatility, and the highest test level-to-cost ratio
instrument on the market.
Portable, mid-range EMC
test system
Resident capabilities for
compliance testing to
6 IEC/EN standards
Addresses ANSI/IEEE, ITU,
ETSI & UL standards
Surge testing to 6.6kV with the
combination, telecom, & ring
waves
Monitors surge voltage &
current at the output terminals
Monitors output of the coupling
unit & automatically switches
connections according to
coupling mode
Highest test levels, widest
selection of tests & lowest
in-use costs
Upgradable as standards
change
Technical Specifications
Model PRO-BASE
EMCPro PLUS Base Unit
System Voltage 90-240VAC, 50/60Hz
INTEGRATED EUT MAINS
COUPLER/DECOUPLER
AC Voltage 1 phase, 50 -
250VAC. 50/60Hz
AC Current 16A max.**
DC Voltage 100VDC max.
DC Current: 10A max.
Frequency 50/60Hz
EUT Connectors Nema, British,
Schuko
CONTROL INTERFACE
Interface RS232 Fiber-optic
SAFETY FEATURES External Interlock for
users
Interlock for CCL
connector
External stop input
ENVIRONMENTAL OPERATING CONDITIONS
Temperature 15°- 40°C
Humidity 10-75%, non-
condensing
Altitude 8000 ft. max.
PHYSICAL
Height 22.9cm (8.7 in)
Width 43.4cm (17.1 in)
Depth 64.8cm (25.5 in)
Weight 39kg (85 lbs.)
CE MARKING Safety and EMC
Directives