Atec Pacific-Power-M6204 - Manual (Page 4)

IEC Flicker Impedance
© 2013 Pacific Power Source, Inc. Subject to change without notice.
Order Example
M6204
• 3 Phase, 12KVA, IEC Lumped Impedance Network
Typical Delivery Items
Ship Kit:
• User Manual
17692 Fitch, Irvine, CA 92614 USA
Phone: +1 949.251.1800
Fax: +1 949.756.0756
Toll Free: 800.854.2433
E-mail: [email protected]
www.pacificpower.com
#4DS-IECIMP Rev062013
Ordering Information
Available Models
M6204
Model Description Requirements
M6204 3 Phase, 12KVA, IEC Lumped Impedance
Network
General/Environmental
Ambient Temperature Operating: 0° - 50° C
Storage: -20 ° - 80° C
Mechanical Specifications
Chassis
Chassis ( W x H x D)
Cabinet Mount
Type
Width including Rack Ears: 19” / 483 mm Depth
3U Rack Mount
16.75” x 5.25” x 23.5”
425 x 133 x 597 mm
19” Rack Width
Rack Slide Mounting Holes on Side of Chassis
or L Bracket support required
Cooling Fan Cooled, Single 120mm dual ball bearing fan,
24Vdc, 0.28Adc rated.
Front Panel Controls None
TBM6204-1 / TBM6204-3
Rear Panel
Connections
Terminal Blocks
Power
Voltage Sense TBM6204-2 / TBM6204-4
Cable J20A / P20A
Use with Programmable AC Power Source. Pacific
Power Source Recommends AMX Series Linear
Models for Harmonics and Flicker test systems.
19" (483mm) 16.75" (425mm)
M6204 IEC Flicker Impedance front and rear views
3U
5.25”,
133 mm)