Neff N64K40N0 - Manual (Page 11)

11
Getting to know the appliance
Here you can gain an overview of your new appliance's
components and functions.
Your new lava stone grill
Switch and indicator light
Use the switches to set the heat output of the grill.You can
adjust the heat output infinitely variably. The two elements can
be set separately. After grilling, turn both switches to 0 to switch
the appliance off.
The respective indicator light lights up when the grill element is
switched on.
Note: The grill is regulated by the grill elements being switched
on and off. Even at maximum power, the grill elements can
switch on and off.
Overheating protection
The overheating protection switches the grill heating off when
the grill overheats. When the grill has cooled down sufficiently,
grill heating switches on again automatically.
Before using for the first time
In this section, you can find out what you must do before using
your grill to prepare food for the first time. Read the Safety
information section beforehand.
Cleaning
Clean the grill and accessories thoroughly before first use
using lukewarm soapy water.
Heating the grill
Heat the empty grill for a few minutes at the highest setting.
This will eliminate the new odour. A slight development of
smoke is normal when the grill is used for the first time.
No. Designation
1 Glass ceramic cover
2 Wire grilling rack
3 Lava stones
4 Lava stone container
5 Rear element switch and indicator light
6 Front element switch and indicator light
7 Grill element
8 Grill container (water bath)