Atec Gossen-Metrawatt-5000DPI - Manual (Page 6)

METRISO 5000 D-PI
Digital High-Voltage Insulation Tester
6 GMC-I Messtechnik GmbH
General Features and Accessories
Feature I1: SECUTEST

PSI
Values measured by the test instrument can be printed from the
PSI module and comments can be added with the alphanumeric
keypad. The LCD at the test instrument is used as a display for
the PSI module.
The PSI module is mounted inside the lid of the test instrument in
a space-saving fashion.
For additional information see our data sheet for the
SECUTEST

PSI .
ISO Calibrator 1
Calibration adapter for test-
ing the accuracy of mea-
surement instruments for
insulation resistance and
low impedance resistance
for test voltages of up to
1000 V.
Order Information
D) Data sheet available
For further information on accessory equipment please refer to
•
our „Measuring Instruments and Testers“ catalog
• our website www.gossenmetrawatt.com
Designation Type ID Number
Digital high-voltage insulation measuring
instrument (basic instrument) - see table
on page 4 for features and add-ons,
including DAkkS calibration certificate
METRISO 5000 D-PI M5810
Standard type available from stock,
M5810 with Features A01 and C1
M5810-V001 M5810-V001
PC Analysis Software
http://www.gossenmetrawatt.com
(
 Products  Electrical Testing  Insulation ...  METRISO 5000 D-PI )
or
http://www.gossenmetrawatt.com
(
 Products  Software  Software for Testers)
Accessories
Trolley for METRISO 5000 D-PI and feature
B1 or B2, including rubber straps for fas-
tening test cables and protective hood
Caddy 204 Z504A
Signal lamp set mounted to a magnetic
base for signalling high-voltage testing in
accordance with DIN VDE 0104
Signal 204 Z504D
Plug-on cable lug for secure attachment of
the test probe to terminals
Kabelschuh 204 Z504E
Set of items to secure high-voltage
testing locations against unauthorized
persons
Claim 204-Set Z504G
Guard cable (1.65 m) with plug
and alligator clips
Guard 5000A Z580C
5 m extension cable Leadex 5000 Z580D
PSI module including 2 rolls recording
chart, 1 printer ribbon cartridge, batteries
and operating instructions
SECUTEST PSI D) GTM5016000R0001
Interface cable RS232, 2 m Z3241 GTZ3241000R0001
Pack of 10 recording chart rolls for
PSI module (1 roll approx. 6.7 meters)
PS-10P GTZ3229000R0001
Pack of 10 printer ribbon cartridges for
PSI module
Z3210 GTZ3210000R0001
2 alligator clips (5 kV version) KY 5000A Z580B
Calibration adapter for test voltages of
up to 1000 V
ISO Calibrator 1 M662A