Atec National-Instruments-NI-ELVIS - Manual (Page 6)

With Quanser the possibilities are infinite + 1 ( 9 0 5 ) 9 4 0 - 3 5 7 5 w w w . q u a n s e r . c o m
Product Information Sheet QNET - 011 - page 2 - rev. B
Description
The Quanser Engineering Trainers for NI ELVIS (QNET) Series is
a new line of training equipment that considerably increases the
value of your investment in NI ELVIS & LabVIEW software.
Designed to connect easily to the NI ELVIS Workstation in place
of the standard prototype board, these cost-effective, plug-and-play
boards significantly extend the functionality of the NI platform. A
wide range of control experiments that feature hardware-in-the-loop
operation can be conducted in the lab environment. Fully compatible
with NI ELVIS & LabVIEW, the QNET series is formally endorsed
by National Instruments.
NI ELVIS Workstation and LabVIEW available from National Instruments
• Maximize The Value Of Your Investment In NI ELVIS & LabVIEW
QNET extends the functionality of NI ELVIS & LabVIEW through instrumented training boards that can be
easily connected to the Workstation and which facilitate a diverse range of control experiments.
• Dramatically Reduce Lab Planning Time
With a comprehensive set of prepackaged curriculum material, the burden to develop lab material is alleviated.
• Optimize Lab Facilities for Multiple Experiment Use
The plug-and-play feature makes it easy to setup and switch experiments in a matter of minutes, resulting
in optimal use of your facilities.
• Advance Learning & Facilitate Greater Insight into Engineering Concepts
With hardware-in-the-loop implementations, students get hands-on, practical experience in the important
aspects of engineering practice. This spurs student interest and motivation, and ultimately improves the
quality of education students receive.
• Lower Total Cost of Ownership
Quanser's and National Instrument’s unparalleled academic-based support ensure technical questions are
resolved in a timely fashion, allowing professors & teaching assistants to focus on other, higher-value tasks.
About NI ELVIS :
NI ELVIS is a LabVIEW-based platform designed to provide an integrated and flexible environment
that enhances measurement, design, and prototyping in an educational laboratory. NI ELVIS integrates
LabVIEW software, a multifunction data acquisition board, and the NI ELVIS Workstation to build a suite of
virtual instruments. visit http://www.ni.com/academic
QNET Series
Why QNET?
QUANSER ENGINEERING TRAINERS
FOR NI ELVIS (QNET)
• DC Motor Control • Rotary Inverted Pendulum • HVAC Trainer
QNET
Product Range