Atec Megger-DELTA3000 - Manual (Page 4)

The optional Resonating Inductor expands the capacitance range
of the DELTA3000
OPTIONAL ACCESSORIES
The optional accessory kit, C/N 670501 includes mini bushing tap
connectors, hot collar straps, temperature/humidity meter, .75” bushing
tap connector, 1” bushing tap connector, “J” probe bushing tap
connector, 3-ft non-insulating shorting leads, 6-ft non-insulating
shorting leads
Optional capacitor kit includes carry case, TTR capacitor (left), and
2 reference capacitors (center). Also shown are 2 connectors (right) that
will work with the capacitors and are supplied with the DELTA3000 unit
DELTA3000
10 kV Automated Insulation Power Factor Test Set
The optional Oil Test Cell, C/N 670511, is used for testing insulating
fluids up to 10 kV
The optional Calibration
Standard traceable to the
NIST for quick operating or
calibration checks of test set
bridges calibrated in watts
loss or in dissipation factor
Optional TTR300D module, for LV three-phase TTR testing, installed inside
DELTA HV cabinet. (Lid not shown for clarity.) PowerDB ONBOARD controls
the TTR300D module, providing all the benefits as referenced in the
Megger TTR330 product specifications.