Atec Megger-MRCT - Manual (Page 7)

MRCT
Megger Relay and Current Transformer Test Set
DeSCrIpTIon part number
Accessories included in Kelvin set of test leads and descriptions relay option
Set of Kelvin test leads: Test leads, 20ft ( 6.096 m) (2 each) 90004-684
With the relay testing option the number and type of leads and accessories included are outlined below. If desired, test leads and
accessories can be ordered individually, see description and part numbers.
Accessories included in standard set of relay test leads and descriptions relay option
Sleeved pair of test leads: Keeps the test leads in pairs and from getting entangled.
Sleeved test leads, one red, one black, 200 cm (78.7”) long, 600 V, 32 amperes CAT II (4 pair)
2001-394
Cable/spade lug adapter (small): Small lug fit most new relay small terminal blocks.
Lug adapter,
red , 4.1 mm, use with test leads up to 1000 V/ 20 amps CAT II (4 each)
684004
Lug adapter, black, 4.1 mm, use with test leads up to 1000 V/ 20 amps CAT II (4 each) 684005
Jumper lead: Used to common returns together on units with floating ground returns, or parallel of current
channels. Jumper lead, black, 12.5 cm (5”) long, use with voltage/current outputs, 600 V, 32 amps CAT II (1 each)
2001-573
Smart Touch View Interface
The MRCT is available with the STVI-1, with an external Power over Ethernet (PoE) interface unit. The PoE power supply has two Ethernet
ports. One port labeled Data & Power Out connects to the STVI Ethernet port, and the Data In port connects to the PC/IN port on the
MRCT.
Smart Touch View Interface (STVI-1 includes the following) STVI-1
Smart Touch View Interface (1 each) STVI-1
Power over Ethernet Interface (1 each)
The PoE interface unit comes with a NEMA 5-15 power cord only. Other power cords are optional, and must be ordered separately
(see Power Cord Option for descriptions and part numbers)
90001-736
STVI Ethernet cable assembly, 210cm (7 ft.) long (1 each) 620094