Atec Fluke-1TS2Pro - Manual (Page 4)

Network advice at your
fingertips.
Determining an acceptable collision or utilization
level is not always obvious from the network
statistics, particularly for less experienced
technicians. With a single touch of the Network
Advice icon, users are empowered to interpret
results that in the past required advanced
expertise.
Remote Web monitoring and
control reduce travel costs.
Imagine the time and money you could save if
you could ship a test tool to a remote site,
instruct a non-technical person how to plug it in,
and then monitor and identify problems at that
site via your web browser. The OneTouch
Series II Pro supports remote control in addition
to the basic Web access available in the OneTouch
Series II models.
Configuring a workstation
is a snap!
With the touch of the ConfigMaster ™ icon,
OneTouch Series II Pro users get the key
information necessary to properly configure a
device or workstation. Network information
includes DNS server name, IP address range,
subnet mask, default gateway, POP3, DNS, and
WINS servers, frame type, and NetBIOS name.
This handy feature eliminates the trial-and-error
method of workstation configuration.
Enhance your OneTouch
Series II with our optional
packages
• OneTouch Series II Reporter Software -
Generate professionally-formatted network
inventory reports on IP or NetBIOS devices
and document Ethernet collisions,
utilization, and errors.
• OneTouch Series II Internetwork
Throughput - Enables IP Performance
testing during installation and mainte-
nance of Enterprise backbones, WANs, and
VPNs.
• OneTouch Series II xDSL - Connected
directly to the Ethernet interface of the
modem, the xDSL option measures actual
transmission rates and tests the entire
xDSL connection - all the way back to the
service provider’s network.