Atec Fluke-1TS2Pro - Manual (Page 3)

Link Pulse LED
Lights green for
normal network
activity and yellow to
indicate a crossover
cable or an uplink
port.
Utilization LED
Lights yellow, green,
or red to indicate
network utilization
levels.
IP Servers
Discovers IP Servers
including DNS, WINS,
POP3, SMTP and DHCP
servers.
Printers
Provides information
on which IP printers
are running on the
network.
Switches
Provides information
on switches including
manufacturer, number
of ports, what
interfaces are avail-
able and which ones
are running.
Station List
Provides information
on both local and
remote stations
including IP, IPX, MAC
addresses and
NetBIOS names.
Error LED
Flashes red whenever
any of the following
error conditions are
detected: bad FCS,
late collisions, short
frames, or jabbers.
Collision LED
Flashes yellow
whenever a collision
is detected.
Duplicate IP
Provides information
on duplicate IP
addresses.
IP Routers
Provides information
including IP and MAC
address, and adver-
tised routing
protocols.
Touchscreen
The OneTouch backlit
touchscreen allows
the user to see a
simple list of choices
at each step in the
troubleshooting
process.
OneTouch ™ Series II Network Assistant Family
Improved Network Visibility
Model Cable Network TCP/IP Switch Remote Web Remote Web Device to Switch Config Key Device
Testing Health Discovery Discovery Monitoring Control Port Mapping Master Ping
Series II 10 • • • • •
Series II 10/100 • • • • •
Series II 10/100 Pro • • • • • • • • •