Atec Fluke-1TS2Pro - Manual (Page 2)

A one-touch view of all network
components–even switches
Just one touch of the AutoTest icon displays the
connectivity status of desktop stations, routers,
servers, and switches. The user simply touches any
component to get in-depth information. For example,
the technician can press the switch icon to view
switch interface information including type, status
and speed, and IP address. The OneTouch ™ Series II
Pro also allows a technician to identify the switch
port to which a PC or other network device is
attached.
The OneTouch Series II testers eliminate
guesswork by automatically identifying Novell ® ,
Windows NT ® , and NetBIOS ® servers. The OneTouch
makes troubleshooting TCP/IP networks easy by
graphically displaying TCP/IP servers, printers,
routers, and switches as well as duplicate IP
addresses, subnets and SNMP devices. The Network
Assistant also solves troublesome wiring problems by
automatically identifying crossover cables and hub
uplink ports. Individual tests for hubs and adapter
cards are also available.
• Web Support Eliminate
unnecessary trips and expenses
when troubleshooting network
problems with remote monitor-
ing and control via a web
browser.
• Switch Support Discover
switch information and map
devices to individual switch
ports.
• Key Device Ping Verify
connectivity to a list of user-
defined devices, such as
routers, servers and switches.
• Duplicate IP Detection
Pinpoint duplicate IP addresses
on your network with a single
touch.
• Cable and Fiber Testing
Identify cable length, opens,
crossed wires, and split pairs.
Measure fiber loss with the
optional Fiber Test Kit.
• NIC Detector Identify network
connections in wiring closets
that are not currently used by
desktop connections.