Atec EXFO-AXS-100 - Manual (Page 7)

AXS-100 Series
Handheld OTDR
LASER SAFETY
21 CFR 1040.10 AND IEC 60825-1:1993+A2:2001
CLASS 1M WITHOUT VFL OPTION
CLASS 3R WITH VFL OPTION
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
IEC 60825-1:1993+A2:2001
21 CFR 1040.10
λ: 650 ± 10 nm
Pout maximum < 5mW (into free space)
www.EXFO.com
Notes
a All specifications valid at 23 °C ± 2 °C (73.4 °F ± 3.6 °F) with an FC/PC connector, unless
otherwise specified.
b. Typical dynamic range with longest pulse and three-minute averaging at SNR = 1.
Multimode dynamic range is specified for 62.5 μm fiber; a 3 dB reduction is seen
when testing 50 μm fiber.
c. Typical dead zone for multimode reflectance below – 35 dB and singlemode reflectance
below –45 dB, using shortest pulse.
d. For multimode port, controlled launch conditions allow 50 μm and 62.5 μm multimode fiber testing.
e. Does not include uncertainty due to fiber index.
f. Typical output power is given at 1300 nm for multimode output and 1550 nm for singlemode
output.
g. At 23 ºC ± 1 ºC, 1550 nm and with FC connector. With OTDR in idle mode, battery operated.
h. For ± 0.05 dB, from 18 ºC to 28 ºC.
SPECIFICATIONS a
Wavelength (nm) 1310/1550/1625 850/1300/1310/1550
Dynamic range b (dB) 29/28/28 (1310/1550/1625) 24/25/32/30 (850/1300/1310/1550)
Pulse width (ns) 10, 30, 100, 275, 1000, 2500, 10 000 Multimode: 5, 10, 30, 100, 275, 1000
Singlemode: 5, 10, 30, 100, 275, 1000, 2500, 10 000
Event dead zone c (m) 2.5 0.8
Attenuation dead zone c (m) 11/12/12 3.5/4.5/4/4.5
Launch conditions d Class CPR 1 or 2
Linearity (dB/dB) ± 0.05 ± 0.03
Loss threshold (dB) 0.05 0.01
Loss resolution (dB) 0.01 0.01
Sampling resolution (m) 0.16 to 5 Multimode: 0.08 to 2.5
Singlemode: 0.08 to 5.0
Sampling points Up to 30 000 Up to 64 000
Distance uncertainty
e
(m) ± (1 + 0.005 % x distance + sampling resolution) ± (0.75 + 0.0025 % x distance + sampling resolution)
Distance range (km) 0.65 to 160 Multimode: 0.1 to 40
Singlemode: 0.65 to 260
Typical real-time refresh (Hz) 2 4
Memory capacity 500 traces 500 traces
Measurement time User-defined User-defined
Stable source output power f (dBm) –9 Multimode: –1.5
Singlemode: -6.5
Visual fault locator (optional) Laser, 650 nm ± 10 nm Laser, 650 nm ± 10 nm
CW Typical Pout in 62.5/125 µm: 3 dBm (2 mW) CW Typical Pout in 62.5/125 µm: 3 dBm (2 mW)
OPTIONAL POWER METER g
Calibrated wavelengths (nm) 850, 1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1430, 1450, 1470, 1490,
1510, 1530, 1550, 1570, 1590, 1610, 1625
Power range (dBm) 26 to –64 (GeX 2 mm)
Uncertainty ±5 % ± 0.4 nW (up to 5 dBm)
Display resolution (dB) 0.01 (–54 dBm to P
max
)
0.1 (–54 dBm to –64 dBm)
1 (–64 dBm to min)
Automatic offset nulling range h Maximum power to —38 dBm
Tone detection (Hz) 270/1000/2000
GENERAL SPECIFICATIONS
Size (H x W x D) 250 mm x 125 mm x 75 mm (9 7 /
8
in x 4 15 /
16
in x 3 in)
Weight 1 kg (2.2 lb)
Temperature operating –18 °C to 50 °C (14 °F to 122 °F)
storage –40 °C to 70 °C (–40 °F to 158 °F)
Relative humidity 0 % to 95 % non-condensing
Power Li-ion batteries 8 hours of continuous operation as per Bellcore TR-NWT-001138
Warranty (years) 1
AXS-100 AXS-110