Atec EXFO-AXS-100 - Manual (Page 5)

AXS-100 Series
Handheld OTDR
www.EXFO.com
The Fiber Technician’s Complete Test Set—
Value-Added Options
IP TESTING
Performing complete access network testing also means testing the delivered service. With the AXS-100’s IP testing option, you can
perform basic IP verification that will facilitate future troubleshooting operations.
VISUAL FAULT LOCATOR
Ideal for easily identifying macrobends, bad splices or bad connectors, this option delivers built-in 650 nm visual fault location on a
universal connector.
POWER METER GeX
The AXS-100’s optional power meter covers the 800 to 1650 nm range, offering a power range of –60 to 26 dBm (GeX 2 mm); it is
also calibrated according to CWDM wavelengths. The optional power meter comes with a three-year recommended calibration interval,
providing for a very low cost of ownership.
SmartKit SOFTWARE
Save time on the field with automated software analysis functions. Let the instrument work for you. This software package combines
automatic macrobend detection, pass/fail and fault finding features. It enables you to access all your results at once and easily check link
status. A single summary screen shows you detailed pass/fail status, fiber-length measurements and pinpoint macrobend localization.
FIBER INSPECTION PROBE
In any optical network, connectors should be kept clean
and in good condition—which is not always easy in
outside conditions. You can quickly and easily inspect
fiber ends or connectors using a fiber inspection probe,
and view the endfaces on the AXS-100’s high-resolution
display. Then, save your image captures for future
documentation purposes.
View fiber ends and connector endfaces on the AXS-100’s high-resolution display.
OTDR Port
Multimode testing or in-service
singlemode testing.
Power Meter Detector Port
Compatible with almost every connector
on the market. Manually and efficiently
perform power and loss testing. Accurately
measure power up to 26 dBm.
OTDR Port
Singlemode testing.
VFL Port
Built-in 650 nm visual fault location
on a universal connector.
Infrared Printer Interface
RJ-45
For TCP/IP testing.
AC Adapter
USB B
For data transfer using ActiveSync.
USB A
For data transfer using memory stick.
Fiber Inspection Probe Port
Flexible Connectivity