Atec JDSU-JD745A - Manual (Page 18)

18
Ordering Information
JD745A CELLADVISOR BASE STATION ANALYZER
Optional Calibration Kits
JD72450509 Y-calibration kit, Type-N(m), DC to 6 GHz, 50 Ω
JD72450510 Y-calibration kit DIN(m), DC to 4 GHz, 50 Ω
JD71050507 Dual-port Type-N calibration kit, 50 Ω
• Y-calibration kit, Type-N(m), DC to 4 GHz, 50 Ω
• Two adapters Type-N(f) to Type-N(f), DC to 4 GHz, 50 Ω
• Two 1 m RF test cables, Type-N(m) to Type-N(m),
DC to 18 GHz, 50 Ω
JD71050508 Dual-Port DIN calibration kit, 50 Ω
• Y-calibration kit DIN(m), DC to 4 GHz, 50 Ω
• Two 1 m RF test cables, Type-N(m) to Type-N(m),
DC to 18 GHz, 50 Ω
• Adapter Type-N(f) to DIN(f), DC to 4 GHz, 50 Ω
• Adapter Type-N(f) to DIN(m), DC to 4 GHz, 50 Ω
• Adapter DIN(f) to DIN(f), DC to 4 GHz, 50 Ω
• Adapter DIN(m) to DIN(m), DC to 4 GHz, 50 Ω
Optional RF Cables
G710050530 1.0 m (3.28 ft) RF cable, DC to 18 GHz, Type-N(m) to
Type-N(m), 50 Ω
G710050531 1.5 m (4.92 ft) RF cable, DC to 18 GHz, Type-N(m) to
Type-N(f), 50 Ω
G710050532 3.0 m (9.84 ft) RF cable, DC to 18 GHz, Type-N(m) to
Type-N(f), 50 Ω
G710050533 1.5 m (4.92 ft) RF cable, DC to 18 GHz, Type-N(m) to
SMA(m), 50 Ω
G710050534 1.5 m (4.92 ft) RF cable, DC to 18 GHz, Type-N(m) to
QMA(m), 50 Ω
G710050535 1.5 m (4.92 ft) RF cable, DC to 18 GHz, Type-N(m) to
SMB(m), 50 Ω
Standard
JD745A 100 kHz to 4 GHz Spectrum Analyzer
5 MHz to 4 GHz Cable and Antenna Analyzer
1
10 MHz to 4 GHz RF Power Meter (Internal mode)
Options
NOTE: Upgrade options for the JD745A use the designation JD745AU
before the respective last three-digit option number.
JD745A001
2-Port Transmission Measurement 2
JD745A002 Bias Tee (requires option 01)
JD745A003 CW Signal Generator
JD745A004 E1 Analyzer 3
JD745A005 T1 Analyzer 3
JD745A006 Bluetooth connectivity 4
JD745A010 GPS Receiver and Antenna
JD745A011 Interference Analyzer 5,6
JD745A012 Channel Scanner
JD745A013 Optical Power Meter 7
JD745A020 cdmaOne/cdma2000 Signal Analyzer
JD745A021 EV-DO Signal Analyzer 8
JD745A022 GSM/GPRS/EDGE Signal Analyzer
JD745A023 WCDMA/HSPA+ Signal Analyzer
JD745A025 TD-SCDMA Signal Analyzer
JD745A026 Mobile WiMAX Signal Analyzer
JD745A028 LTE-FDD Signal Analyzer
JD745A029 LTE-TDD Signal Analyzer
JD745A030 LTE Advanced-FDD Signal Analyzer 9
JD745A031 LTE Advanced-TDD Signal Analyzer 10
JD745A040 cdmaOne/cdma2000 OTA Analyzer 6, 11
JD745A041 EV-DO OTA Analyzer 6, 11
JD745A042 GSM/GPRS/EDGE OTA Analyzer 6, 11
JD745A043 WCDMA/HSPA+ OTA Analyzer 6, 11
JD745A045 TD-SCDMA OTA Analyzer 6, 11
JD745A046 Mobile WiMAX OTA Analyzer 6, 11
JD745A048 LTE-FDD OTA Analyzer 6, 11
JD745A049 LTE-TDD OTA Analyzer 6, 11
Standard Accessories
G710550326 AC/DC power adapter 12
G710550335 Cross LAN cable (1.5 m) 12
GC73050515 USB A to B cable (1.8 m) 12
GC72450518 >1 G Byte USB memory 12
G710550325 Rechargeable lithium ion battery 12
G710550323 Automotive cigarette lighter 12 VDC adapter 12
G710550316 Stylus pen 12
JD740A361 JD740A series user’s manual and application software
— CD
1. Requires calibration kit.
2. Requires dual-port calibration kit.
3. Requires test cable.
4. Includes two Bluetooth USB dongles with 5 dBi dipole antenna (JD70050006).
5. Recommend adding GPS receiver JD745A010.
6. Recommend adding antennas G70005035x and/or G70005036x.
7. Requires an optical power sensor (MP-60 or MP-80).
8. Requires Option 020.
9. Requires Option 028.
10. Requires Option 029.
11. Requires Option 010.
12. Standard accessory, can be purchased separately.