Atec R-S-CBT_CBT32 - Manual (Page 9)

Version 06.00, April 2009
Rohde & Schwarz R&S ® CBT/R&S ® CBT32 Bluetooth ® Tester 9
THD+N meter
Measurement bandwidth
21 kHz
Frequency range 100 Hz to 10 kHz
Level range 10 mV to 30 V
Resolution 0.01 % THD+N
Inherent distortion at 100 mV ≤ level ≤ 20 V < 0.05 % THD+N
at 100 mV ≤ level ≤ 2 V < 1 % + inherent resolution Uncertainty
at 2 V < level ≤ 20 V < 2 % + inherent resolution
R&S
®
CBT-B42 digital audio interface
S/P-DIF S/P-DIF IN, S/P-DIF OUT in line with IEC 60958-3
Sampling rate 48 kHz
Inputs and outputs (rear panel)
Remote control interfaces
IEC/IEEE bus
IEC 60625-2 (IEEE 488.2) 24-pin Amphenol connector
Serial interface COM 1 RS-232-C (COM) 9-pin D-Sub connector
Printer interface LPT parallel (Centronics compatible) 25-pin D-Sub connector
Keyboard USB connector
Analog monitor (VGA) 15-pin D-Sub connector
RF menu
test trigger BNC connector TRIG OUT
Bluetooth ® menu
Trigger output
burst trigger BNC connector TRIG OUT
External reference REF IN 10 MHz BNC connector