Atec R-S-CBT_CBT32 - Manual (Page 3)

Version 06.00, April 2009
Rohde & Schwarz R&S ® CBT/R&S ® CBT32 Bluetooth ® Tester 3
Unit specifications
Standards Bluetooth ® Core Specification
Version 2.1+EDR: test mode supported
Radio Frequency Test Specification
V1.2/V2.0/V2.0+EDR/V2.1+EDR
Bluetooth
® Low Energy Specification
TCXO time base
Max. frequency drift in temperature range +5 °C to +45 °C ±1 × 10 –6
Max. aging ±1 × 10 –6 /year
Reference frequency input
Synchronization input BNC connector REF IN
sinewave 10 MHz Frequency
squarewave (TTL level) 10 MHz
Max. frequency variation ±5 × 10 –6
Input voltage range 0.5 V to 2 V, rms
Impedance 50 Ω
RF generator
Bluetooth ® menu 2402 MHz + k × 1 MHz, k = 0 to 93 RF channel definition
Bluetooth ® LE menu 2404 + k × 2 MHz, k = 0 to 10
2406 + k × 2 MHz, k = 11 to 36
channel 37 = 2402 MHz
channel 38 = 2426 MHz
channel 39 = 2480 MHz
RF menu 2398 MHz to 2499 MHz
Bluetooth ® menu 2402 MHz to 2495 MHz
Frequency range
Bluetooth ® LE menu 2402 MHz to 2480 MHz
Frequency resolution channel spacing in line with standard 1 MHz
Frequency offset range ±250 kHz
Frequency offset resolution 1 kHz
RF menu ±5 Hz + drift of time base Frequency uncertainty
Bluetooth ® and Bluetooth ® LE menu ±100 Hz + drift of time base
modes in line with Bluetooth ® standard Europe (except France), USA
France
RX/TX single frequency
reduced hopping Hopping scheme
Bluetooth ® Low Energy no hopping and no signaling
Output level range
for basic rate packets and for
Bluetooth
® Low Energy packets
–90 dBm to +0 dBm RF IN/OUT
for EDR packets (2-DHx, 3-DHx) –90 dBm to –3 dBm